Westinghouse MT80A THIN Installation Instructions - Page 6
Attaching Hook Bracket to Flat Panel Screen, fig. 2.1, fig. 2.2
View all Westinghouse MT80A THIN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Attaching Hook Bracket to Flat Panel Screen 2 Thread M5 phillips screws (C) to hook bracket (B) making the screws flush with bracket as shown in B figures 2.1 and 2.2. B C fig. 2.1 fig. 2.2 C WARNING • If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail. 3 FOR VESA® 75 MOUNTING PATTERN: Choose hole pattern as shown below. Attach hook bracket (B) to back of screen using four M4 x 10 mm screws (D) as shown below. *Note: If hole pattern is in a pocket, attach hook bracket (B) to back of screen using four M4 x 20 mm screws (E) and four retaining spacers (F) as indicated below. FOR VESA 100 MOUNTING PATTERN: Choose hole pattern as shown below. Attach hook bracket (B) to back of screen using four M4 x 10 mm screws (D) as shown below. B D *For screens with a hole pattern in a pocket, spacers (F) go between hook bracket (B) and screen. F D 6 of 8 B ISSUED: 01-17-06 SHEET #: 202-9090-1