Whirlpool DP940PWSQ Use and Care Guide - Page 8

6. Press the desired cycle and option selections. (See "Dishwasher Use.") 7. Press START/RESUME. Stopping Your Dishwasher You can stop your dishwasher anytime during a cycle. 1. Open the door slightly. 2. Wait for the spraying action to stop. Then open the door all the way, if needed. Close the door to continue the cycle. OR Press CANCEL/DRAIN. A 2-minute drain starts. CONNECTING THE DISHWASHER Connecting the Faucet Adapter NOTE: A special adapter must be installed on the faucet before the dishwasher can be connected. Complete Installation Instructions and the adapter are packed with your dishwasher. (See the Installation Instructions.) When moving your dishwasher, make sure the door is latched. Hold the dishwasher at the top front corners. Connecting the faucet adapter to faucets with external threads Insert the 2 screens and then the thin washer from the faucet adapter kit into the faucet adapter. Attach the adapter onto the end of the faucet. Preparing the faucet NOTE: Do not use the thick washer. 1. Remove the screen holder or aerator, screen, and washer from the end of the faucet. 2. Use the faucet adapter kit that came with your portable dishwasher to modify the faucet where the dishwasher will be A used. B NOTE: Remove and save the washer, screen, and screen holder or aerator for future use. C A B C A. Washer B. Screen C. Screen holder or aerator A. Thin washer B. Screens C. Faucet adapter Connecting the faucet adapter to faucets with internal threads Insert the 2 screens, the thin washer, and then the thick washer from the faucet adapter kit into the faucet adapter. Attach the adapter onto the end of the faucet. NOTE: Use both washers. A B C D A. Thick washer B. Thin washer C. Screens D. Faucet adapter 8