Whirlpool MED6000XW Installation Instructions - Page 20

Reverse outer window/handle - door reversal

Get Whirlpool MED6000XW PDF manuals and user guides View all Whirlpool MED6000XW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

4. Remove trim ring from outer window assembly 6. Rotate and reassemble outer door and trim ring A A B Using a Phillips screwdriver, remove the 6 screws from the outer window retainer and rotate the outer window assembly clockwise until the square notches line up with the 4 tabs on the trim ring indicated with arrows in the figure A above. Then lift the outer window retainer up and off the trim ring and set aside (B). 5. Reverse outer window/handle B Align the notches on the outer door assembly with the tabs on the trim ring and lower into place as shown in figure A. Rotate the outer door assembly counterclockwise to lock tabs into place (figure B). Using a Phillips screwdriver, secure with 6 screws removed earlier. IMPORTANT: Do not overtighten. Rotate the outer window 180°. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
20
Reverse outer window/handle
5.
Rotate the outer window 180°.
Remove trim ring from outer
window assembly
4.
Using a Phillips screwdriver, remove the 6 screws from the
outer window retainer and rotate the outer window assembly
clockwise until the square notches line up with the 4 tabs
on the trim ring indicated with arrows in the figure A above.
Then lift the outer window retainer up and off the trim ring
and set aside (B).
A
B
Rotate and reassemble outer door
and trim ring
6.
Align the notches on the outer door assembly with the tabs on
the trim ring and lower into place as shown in figure A.
Rotate the outer door assembly counterclockwise to lock tabs
into place (figure B). Using a Phillips screwdriver, secure with
6 screws removed earlier.
IMPORTANT
: Do not overtighten.
A
B