Whirlpool MED6000XW Installation Instructions - Page 21
Reinstall hinge and latch on, opposite sides, Reinstall inner door assembly, Reinstall door on dryer
View all Whirlpool MED6000XW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
7. Remove hinge and latch Latch 9. Reinstall inner door assembly Hinge Using a Torx® T25 screwdriver, remove the 3 Torx screws securing the latch plate and latch backing plate and the 5 screws holding the hinge assembly in place. 8. Reinstall hinge and latch on opposite sides Position the door with the inside of the door facing up. Reinstall the 10 screws securing the inner door to the outer door. 10. Reinstall door on dryer Using a Torx® T25 screwdriver, reinstall the latch plate, latch backing plate, and hinge assembly on the opposite sides from which they were removed. Using a Torx® T25 screwdriver, remove the 4 screws on the dryer. Insert the tabs on the hinge into the mounting slot and slide down to engage the top tab. Secure in place with the 4 Torx® T25 screws removed earlier. 21