Whirlpool RF367LXSS Use and Care Guide - Page 13
Display, Start, Off/Cancel, Clock, Tones
View all Whirlpool RF367LXSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Style 4 - Electronic Oven Control (on some models) AB C DE J I H A. Oven light B. Clock C. Oven display D. Start/control lock E. Cancel/off G F F. Temperature/time G. Broil H. Bake I. Timer J. Auto Clean Display Style 1 - Electronic Oven Control When power is first supplied to the appliance, "12:00 PM" will appear on the display. See "Clock" section to set time of day. If "12:00 PM" appears at any other time, a power failure has occurred. Press OFF/CANCEL and reset the clock if needed. When the oven is not in use, the display shows the time of day. Styles 2, 3 & 4 - Electronic Oven Controls When power is first supplied to the appliance, a flashing time will appear on the display. Press OFF/CANCEL to clear the display. If a flashing time appears at any other time, a power failure has occurred. Press OFF/CANCEL and reset the clock if needed. When the oven is not in use, the display shows the time of day. When performing a timed cook function, the display will show either hours and minutes, or minutes and seconds. Start Style 1 - Electronic Oven Control The Start pad begins any oven function. The display will show SET TEMP OR TIME OR PUSH START. Styles 2, 3 & 4 - Electronic Oven Controls The Start pad begins any oven function. If the Start pad is not pressed within 5 seconds after pressing a function pad, the "START?" or "?" indicator light will appear on the display (on some models). If the Start pad is not pressed within 5 minutes after pressing a function pad, the oven display will return to the time of day mode and the programmed function will be canceled. Off/Cancel The Off/Cancel pad stops any function except the Timer, Control Lock or Warm Drawer (on some models). Clock On some models, this is a 12-hour clock that shows a.m. and p.m. To Set: Before setting, make sure the oven and Timer are off. 1. Press CLOCK. 2. Depending on your model, press the HOUR or MIN, TEMP/ TIME or TEMP/HOUR "up" or "down" arrow pads to set the time of day, including a.m. or p.m. 3. Press CLOCK. Tones Tones are audible signals, indicating the following: Basic Functions One tone s Valid pad press s Oven is preheating (long tone) s Function has been entered s Reminder (on some models), repeating each minute after the end-of-cycle tones Three tones s Invalid pad press Four tones s End of cycle Style 1 - Electronic Oven Control Reminder Tones: Reminder tones may be turned off. Press and hold BAKE for 5 seconds. REMINDER TONES OFF will appear on the display. Repeat to turn reminder tones back on, and REMINDER TONES ON will appear on the display. All Tones: All of the above tones are preset on. To disable tones, press and hold CLOCK for 5 seconds. Repeat to turn tones back on. To Turn Off/On: Press and hold CLOCK for 5 seconds. A tone will sound when changing tones from OFF to ON. ALL SOUNDS OFF will appear on the display. Repeat to turn on tones, and ALL SOUNDS ON will appear on the display. Tone Pitch: The pitch is preset at high, but can be changed to low. To Change: Press and hold BROIL for 5 seconds. A tone will sound, and TONE PITCH LOW will appear on the display. Repeat to change, and TONE PITCH HIGH will appear on display. End of Cycle Tones: Press and hold CONVECT for 5 seconds to turn off END OF CYCLE TONES. Press and hold CONVECT for 5 seconds to turn on END OF CYCLE TONES. Key Press Tone: Press and hold WARM (Cooking Options) for 5 seconds, and KEY PRESS TONES OFF will appear on the display. Press and hold WARM for 5 seconds, and KEY PRESS TONES ON will appear on the display. 13