Whirlpool SF216LXSQ Installation Instructions - Page 13

Natural Gas Conversion WARNING 3. Turn the cap over so that N or NAT is visible. A Tip Over Hazard A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved. Failure to follow these instructions can result in death or serious burns to children and adults. 1. Turn manual shutoff valve to the "closed" position. 2. Unplug range or disconnect power. B A C A. To range B. Manual shutoff valve "closed" position C. Gas supply line 4. Reinstall the cap. A. Cap To Convert Surface Burners 1. Remove burner grate, burner caps and burners. C A B To Convert Gas Pressure Regulator 1. Open broiler door and remove broiler pan. The gas pressure regulator is located in the back right hand corner of the broiler compartment. A A. Burner cap B. Burner C. Center burner 2. Locate the Natural gas orifice spuds for top burners in the bag containing literature included with the range. Three Natural gas spuds are stamped "125," one is stamped "132" and one "128." 3. Remove the LP gas orifice spuds using a 7 mm combination wrench. 4. Install the Natural gas orifice spuds using a 7 mm combination wrench. A. Gas pressure regulator A IMPORTANT: Do not remove the gas pressure regulator. NOTE: Do not remove the spring beneath the cap. 2. Remove the cap from the gas pressure regulator using a flat-blade screwdriver. B A A. Spud B. Holder A. Cap 13