Whirlpool WCD3090J Owners Manual - Page 23
Connect remaining wires, Optional External Ground for 3-Wire, Connection, Connect neutral wire,
View all Whirlpool WCD3090J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2. Connect neutral wire B D C 2. Connect neutral wire B D C Place hooked end of neutral wire (white or center) (C) of direct wire cable under center screw of terminal block (B), hook facing right. Squeeze hooked end together. Tighten screw. 3. Connect remaining wires Connect neutral wire (white or center) (C) of power supply cord or cable under center terminal block screw (B). Make sure the end of neutral bonding wire (white) (D) looped in Step 1 remains on the center terminal when the power supply cord neutral wire is attached. Tighten screw. 3. Connect remaining wires Place hooked ends of remaining direct wire cable wires under outer terminal block screws (hooks facing right). Squeeze hooked ends together, tighten screws, tighten strain relief screws. Finally, replace the terminal block cover and secure with the 4 hold-down screws. Now, go to "Level Dryer." Optional External Ground for 3-Wire Connection (Power Supply Cord Shown) IMPORTANT: You must verify with a qualified electrician that this grounding method is acceptable before connecting. 1. Prepare to connect neutral wire Place ends of remaining wires under outer terminal block screws. Tighten screws and tighten strain relief. 4. Connect external ground wire G A B D A Remove center terminal block screw (B) and green external ground conductor screw (A). Loop neutral bonding wire (blue) (D) to center terminal block location. Connect a separate copper ground wire (G) under the green external ground conductor screw (A) to an adequate ground. Finally, replace the terminal block cover and secure with the 4 hold-down screws. Now, go to "Level Dryer." 23