Whirlpool WCE55US0HB Owners Manual - Page 5

36" (91.4 cm) Model WCE97US6H Touch-Activated Electronic Control Model shown B C D A WARM ZONE TRIPLE ELEMENT H DUAL ELEMENT ON OFF ON OFF ZONE SIZE ON OFF ZONE SIZE Hold 3 sec Wifi Timer WARM ZONE OK ON OFF G A. Ceramic glass cooktop B. 6" (15.2 cm) single element C. 12"/10"/6" (30.5 cm/25.4 cm/15.2 cm) triple element D. Right rear warming zone F E E. 6" (15.2 cm) single element F. Control panel G. 10"/6" (25.4 cm/15.2 cm) dual element H. Model and serial number plate (located underneath cooktop on metal cabinet) COOKTOP CONTROLS - ELECTRONIC TOUCH CONTROLS Cooktop Controls Wi-Fi Connectivity ■■ Connect to Network: Download the Whirlpool® app from the app store on your mobile phone. See the Connectivity Setup sheet for more detailed instructions. ■■ SAID Code: The SAID code is used to sync a smart device with your appliance. The SAID code plate is located on the metal cabinet underneath the cooktop. See the following illustration. ■■ Wi-Fi Radio: Turn Wi-Fi on or off. WARNING B A A. Model/serial number plate B. SAID code for Wi-Fi connection ■■ MAC Address: MAC Address is displayed for the Wi-Fi module. Fire Hazard Turn off all controls when done cooking. Failure to do so can result in death or fire. The electronic touch controls offer a variety of heat settings for optimal cooking results. For maximum element operation, all cooktop electronic touch controls can be set to High when bringing liquids to a rapid boil. When the cooktop is turned on or after power is restored to the cooktop after a power failure, all temperature setting lights will glow for 10-15 seconds. After the lights go off, the cooktop is ready to use. To Use: 1. Touch ON/OFF for the desired element. 2. Touch the UP or DOWN keypad to select the power level. 5