Whirlpool WDTA50SAHV Use & Care Guide - Page 5
Quick Steps
View all Whirlpool WDTA50SAHV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1 Remove bulk food and load dishwasher. Quick Steps 3 Select a cycle and options (varies by model). Scrape off excess food into garbage or food disposer. Load dishes so that water spray will reach every surface. 2 Add detergent and rinse aid. SLIDE SLIDE 4 Start dishwasher. To start and resume a cycle, press the (Start/resume) keypad and close the door within 4 seconds. If the door is not closed within 4 seconds, the Start keypad LED will flash, an audible tone will sound, and the cycle will not start. 5 Unload dishwasher and clean the filter. See "Recommended Time Interval to Clean Your Filter" in the "Filtration System" section for the recommended cleaning schedule. 5
5
1
Remove bulk food and load dishwasher.
Scrape off excess food into
garbage or food disposer.
Load dishes so that
water spray will reach
every surface.
2
Add detergent and rinse aid.
SLIDE
SLIDE
3
Select a cycle and options (varies by model).
4
Start dishwasher.
To start and resume a cycle,
press the
(Start/resume)
keypad and close the door
within 4 seconds. If the
door is not closed within
4 seconds, the Start keypad
LED will flash, an audible tone
will sound, and the cycle will
not start.
5
Unload dishwasher and
clean the filter.
See “Recommended Time
Interval to Clean Your Filter”
in the “Filtration System”
section for the recommended
cleaning schedule.
Quick Steps