Whirlpool WDTA50SAHV Installation Guide - Page 6
Location Requirements
View all Whirlpool WDTA50SAHV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
For Direct Wire For Power Cord Cabinet Grommet For 11/2" (38 mm) hole in cabinet. (Whirlpool Part Number 302797) NOTE: Required for metal cabinets Power Cord Kit Kit typically includes power cord, metallic strain relief, grommet, and twist-on wire connectors. (Whirlpool Part Number 4317824) Call us at our toll-free number, visit our website listed in the User Guide for part numbers above, or see local electrical supply retailer for equivalent. LOCATION REQUIREMENTS Dishwasher must be fully enclosed (top, sides, back, and floor) upon installation. A side panel kit is available from your dealer for installing your dishwasher at the end of your cabinetry. An optional moisture barrier accessory is also available for installing underneath a wooden countertop. See the "Tools and Parts" section at the front of the guide for part details and orders. Check location where dishwasher will be installed. The location must provide: ■■ Convenient access for loading and unloading dishes. Corner locations require a 2" (51 mm) minimum clearance between the side of the dishwasher door and the wall or cabinet. ■■ Easy access to water, electricity, and drain: ■■ Grounded electrical supply is required. ■■ This dishwasher has a water heating feature and also requires a connection to a hot water supply line. ■■ Make sure pipes, wires and drain hose are within the shaded area shown in the "Product and Cabinet Opening Dimensions" section. ■■ Do not run drain lines, water lines, or electrical wiring where they can interfere with or contact dishwasher motor or legs. ■■ Shelter dishwasher and water lines leading to dishwasher against freezing. Damage from freezing is not covered by the warranty. NOTE: If dishwasher will be left unused for a period of time or in a location where it may be subject to freezing, have it winterized by authorized service personnel. ■■ If installed in new construction, flush the water supply line of debris before connecting it to the fill valve. If it is not flushed, debris from the water supply could plug the fill valve screen. ■■ A square opening for proper operation and appearance ■■ The cabinet front to be perpendicular to floor ■■ A level floor Helpful Hint: If floor at front of opening is not level with floor at rear of opening, shims may be used to level dishwasher. NOTE: To avoid shifting during dishwasher operation, shims must be securely attached to the floor. ■■ The location where the dishwasher will be installed must provide clearance between motor and flooring. Motor should not touch the floor. ■■ Do not install dishwasher over carpeted flooring. 6