Whirlpool WFG320M0MW Installation Instructions - Page 13

2. Remove the cap from the gas pressure regulator using a flat-blade screwdriver. NOTE: Be sure sealing washer remains in the same position. A 4. Install Propane gas orifice spuds using a 7 mm (9/32") combination wrench. A A. Cap 3. To convert to Propane gas, unscrew the plastic adjustment screw by hand, turn it over, and screw it in again. Inlet pressure to Natural gas A B Inlet pressure to Propane gas C 180° A. Cap B. Sealing washer C. Adjustment screw 4. Reinstall the cap. To Convert Surface Burners 1. Remove burner grate, burner caps, and burners. A. Spud NOTE: The range cooktop is equipped with 4 burners: 2 burners are power (front), 1 burners is standard (left rear), and 1 is simmer (right rear). A C B D A B A. Burner cap B. Burner 2. Locate the Propane gas orifice spuds for top burners in the bag containing literature included with the range. One Propane gas spuds are stamped "068," two are stamped "117," and one is stamped "088." 3. Remove Natural gas orifice spuds using a 7 mm (9/32") combination wrench. A. Standard burner - Propane gas orifice spud number 088 B. Power burner - Propane gas orifice spud number 117 C. Simmer burner - Propane gas orifice spud number 068 D. Power burner - Propane gas orifice spud number 117 5. Place the Natural gas orifice spuds in the parts bag for future use and keep with the bag containing literature. 6. Reinstall burners, burner caps, and burner grates. To Convert Oven Burner 1. Open the oven door and remove oven racks and oven tray with flame spreader, and set aside. 2. Remove screw from the oven burner. Lift oven burner and pull the burner toward you. The orifice spud is behind the oven burner air shutter. A B C A. Oven burner B. Air shutter C. Screw 13