Whirlpool WFG320M0MW Installation Instructions - Page 15

2. Remove the cap from the gas pressure regulator using a flat-blade screwdriver. NOTE: Make sure sealing washer remains in the same position. A 2. Locate the Natural gas orifice spuds for top burners in the bag containing literature included with the range. Two Natural gas spuds are stamped "139," one is stamped "175," and one is stamped "100." 3. Remove the Propane gas orifice spuds using a 7 mm (9/32") combination wrench. 4. Install the Propane gas orifice spuds using a 7 mm (9/32") combination wrench. A. Cap 3. To convert to Natural gas, unscrew the plastic adjustment screw by hand, turn it over, and screw it in again. Inlet pressure to Propane gas A B Inlet pressure to Natural gas C 180° A. Cap B. Sealing washer C. Adjustment screw 4. Reinstall the cap. To Convert Surface Burners 1. Remove burner grate, burner caps and burners. A A. Spud NOTE: The range cooktop is equipped with 4 burners: 2 burners are power (front), 1 burners is standard (left rear), and 1 is simmer (right rear). A C A B A. Burner cap B. Burner B D A. Standard burner - Natural gas orifice spud number 140 B. Power burner - Natural gas orifice spud number 175 C. Simmer burner - Natural gas orifice spud number 100 D. Power burner - Natural gas orifice spud number 175 5. Place Propane gas orifice spuds in the parts bag for future use and keep with the bag containing literature. 6. Reinstall burners, burner caps, and burner grates. 15