Whirlpool WGG755S0BS Installation Guide - Page 13

To Convert Oven Bake Burners Nat. gas to LP

Page 13 highlights

2. Unscrew the regulator cap and remove the plastic cover. 5. Unscrew wing nut and remove oven baffle. A A B B A. Plastic cover B. Regulator cap 3. Flip the regulator cap over and replace the plastic cover. B A C A. Oven baffle B. Wing nut 6. Remove the oven bake burner screw and set aside. 7. Gently set the bake burner to the side. A A. Natural gas position B. LP gas position C. Plastic cover 4. Screw the regulator cap securely back into place. Do not overtighten. To Convert Oven Bake Burners (Nat. gas to LP) To Convert Lower Oven Bake Burner: 1. Remove oven racks from inside the oven cavity. 2. Remove oven door. See "Oven Door" section in the Use and Care Guide for oven door removal instructions. 3. Push the bake burner cover to the right. B A. Igniter and wires B. Bake burner screw 8. Unscrew and remove the cover over the orifice. A A A. Bake burner cover 4. Lift up and remove oven bake burner cover. A. Orifice cover 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

13
2.
Unscrew the regulator cap and remove the plastic cover.
3.
Flip the regulator cap over and replace the plastic cover.
4.
Screw the regulator cap securely back into place. Do not
overtighten.
To Convert Oven Bake Burners (Nat. gas to LP)
To Convert Lower Oven Bake Burner:
1.
Remove oven racks from inside the oven cavity.
2.
Remove oven door. See “Oven Door” section in the Use and
Care Guide for oven door removal instructions.
3.
Push the bake burner cover to the right.
4.
Lift up and remove oven bake burner cover.
5.
Unscrew wing nut and remove oven baffle.
6.
Remove the oven bake burner screw and set aside.
7.
Gently set the bake burner to the side.
8.
Unscrew and remove the cover over the orifice.
A. Plastic cover
B. Regulator cap
A. Natural gas position
B. LP gas position
C. Plastic cover
A. Bake burner cover
A
B
A
B
C
A
A. Oven baffle
B. Wing nut
A. Igniter and wires
B. Bake burner screw
A. Orifice cover
A
B
A
B
A