Whirlpool WGT3300XQ Installation Guide - Page 17

5. Move washer/dryer to final location 7. Secure drain hose Laundry Tub Standpipe Wall 4.54".5" (113 mm) 4.5" (113 mm) 4.5" (113 mm) If you are working in a closet or recessed area: move the washer/dryer into its final location and remove cardboard from under washer/dryer. Remove the access panel by removing 3 Phillips-head screws and one bumper, located at the top of the access panel. Set panel, screws, and bumper aside. Complete hookup of water hoses. Replace access panel upon completion of washer/dryer installation. 6. Check for leaks Secure drain hose to laundry tub leg, drain standpipe, or inlet hoses for wall standpipe with shipping strap removed earlier. Turn on water faucets to check for leaks. A small amount of water may enter washer. It will drain later. 17