Whirlpool WMT50011KS Owners Manual - Page 13
Electrical Shock Hazard
View all Whirlpool WMT50011KS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
8. Pull out the halogen light from the light holder. 13. Use the 3 screws removed in step 3 to reattach the leftside cooling duct. WARNING 9. Replace with a new halogen light. 10. Reattach the light cover with the screw removed in step 6. 11. Reattach the trim kit frame that was removed in step 5, to the microwave oven by first aligning the 4 locating slots with the locating pins. 12. Use the 4 screws removed in step 4, to fasten the trim kit frame to the microwave oven. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 14. Slide the microwave oven back to the cabinet. Plug in the microwave oven. 15. Reattach the trim kit frame and microwave to the cabinet using the screws removed in step 1. 13