Whirlpool WRF550CDHZ Owners Manual - Page 20

Remove Left-Hand Refrigerator Door

Get Whirlpool WRF550CDHZ PDF manuals and user guides View all Whirlpool WRF550CDHZ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Style 2 � Remove the two screws fastening the base grille to the cabinet and set screws aside. � Grasp the grille and pull it toward you. NOTE: To allow the refrigerator to roll easier, raise the brake feet by turning them counterclockwise. The front rollers will be touching the floor. Style 3 WARNING Excessive Weight Hazard Use two or more people to lift the appliance door. Failure to do so can result in back or other injury. 4. Lift the refrigerator door from the bottom hinge pin. The top hinge will come away with the door. Remove Left-Hand Refrigerator Door IMPORTANT: On models with a water dispenser, the tubing and wiring for the water dispenser run through the left-hand door hinge, so they must be disconnected before removing the door. 1. Remove the cover from the top hinge as shown below. � Use a 1/4" hex-nut driver to remove both screws in the base grille. � Using both hands, grasp the grille firmly and pull it toward you. Open the freezer drawer to access the brake feet. NOTE: To allow the refrigerator to roll easier, raise the brake feet by turning them counterclockwise. The front rollers will be touching the floor. Remove Right-Hand Refrigerator Door 3. Starting with the right-hand side door, remove the parts for the top hinge as shown below. A. Top hinge cover screw B. Top hinge cover 2. Disconnect the water dispenser tubing located on top of the door hinge (if applicable). Water Tubing Connection Style 1: Press the colored outer ring against the face of the fitting and gently pull the dispenser tubing free as shown below. NOTE: The water dispenser tubing remains attached to the lefthand refrigerator door. A. Top hinge cover screw D. Top Hinge B. Top hinge cover E. Locator Screws C. 3/16" Internal hex-head screws NOTE: Do not remove the two locator screws. These screws will help you align the hinge when you replace the door. A. Outer ring 20 B. Face of fitting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
20
Style 2
�
Remove the two screws fastening the base grille to the cabinet
and set screws aside.
�
Grasp the grille and pull it toward you.
NOTE:
To allow the refrigerator to roll easier, raise the brake
feet by turning them counterclockwise. The front rollers will be
touching the floor.
Style 3
�
Use
a
1/4
"
hex–nut
driver
to
remove
both
screws
in
the
base
grille.
�
Using
both
hands,
grasp
the
grille
firmly
and
pull
it
toward
you.
Open
the
freezer
drawer
to
access
the
brake
feet.
NOTE:
To
allow
the
refrigerator
to
roll
easier,
raise
the
brake
feet
by
turning
them
counterclockwise.
The
front
rollers
will
be
touching
the
floor.
Remove Right-Hand Refrigerator Door
3.
Starting with the right-hand side door, remove the parts for the
top hinge as shown below.
A. Top hinge cover screw
D. Top Hinge
B. Top hinge cover
E. Locator Screws
C. 3/16" Internal hex-head screws
NOTE:
Do not remove the two locator screws. These screws
will help you align the hinge when you replace the door.
WARNING
Excessive Weight Hazard
Use two or more people to lift the appliance door.
Failure to do so can result in back or other injury.
4.
Lift the refrigerator door from the bottom hinge pin. The top
hinge will come away with the door.
Remove Left-Hand Refrigerator Door
IMPORTANT:
On models with a water dispenser, the tubing and
wiring for the water dispenser run through the left-hand door
hinge, so they must be disconnected before removing the door.
1.
Remove the cover from the top hinge as shown below.
A. Top hinge cover screw
B. Top hinge cover
2.
Disconnect the water dispenser tubing located on top of the
door hinge (if applicable).
Water Tubing Connection Style 1:
Press the colored outer ring
against the face of the fitting and gently pull the dispenser tubing
free as shown below.
NOTE:
The water dispenser tubing remains attached to the left-
hand refrigerator door.
A. Outer ring
B. Face of fitting