Whirlpool WTW8800YC Use & Care Guide - Page 10

7. Select cycle 8. Select cycle modifiers Turn cycle knob to choose your wash cycle. Estimated Time Remaining will light up with a cycle time. You may notice time adjusting during the cycle. This is normal. If you do not want to begin a cycle immediately, you may choose DELAY WASH option. To choose a delay time: 1. Press DELAY WASH button to select desired delay time. 2. Press START/PAUSE. To cancel delaying a cycle: 1. Press START/PAUSE again to begin a wash cycle immediately. IMPORTANT: When delaying a cycle, use liquid HE detergent only in the dispenser. Powdered detergents may absorb moisture from a previous cycle and clump before the wash cycle begins. Once you select a cycle, the default modifiers for that cycle will be lit. Press the cycle settings buttons to change the Soil Level, Spin Speed, and Wash Temp, if desired. Not all settings are available with all cycles. NOTE: Always read and follow fabric care labels instructions to avoid damage to your garments. Wash Temp Suggested Fabrics Hot Some cold water is added to save energy. This will be cooler than your hot water heater setting. Warm Some cold water will be added, so this may be cooler than what your previous washer provided. Whites and pastels Durable garments Heavy soils Bright colors Moderate to light soils Cool Warm water is added to assist in soil removal and to help dissolve detergents. Cold Warm water may be added to assist in soil removal and to help dissolve detergents. Colors that bleed or fade Light soils Dark colors that bleed or fade Light soils Eco Cold This is the temperature from your faucet. Dark colors that bleed or fade Light soils 10