Whirlpool WVU37UC4F Installation Instructions - Page 14
Range Hood Use
View all Whirlpool WVU37UC4F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Option 2 - Power Cord Kit Installations For optional power cord kit installations, follow the instructions supplied with the power cord kit. See the "Accessories" section for information on ordering. NOTE: Use only with range hood cord connection kits that have been investigated and found acceptable for use with this model range hood. Complete Installation 1. Replace grease filter if removed. See the "Range Hood Care" section. 2. Check the operation of the range hood fan and light. See the "Range Hood Use" section. If range hood does not operate, check to see whether a circuit breaker has tripped or a household fuse has blown. Disconnect power and check wiring connections. NOTE: To get the most efficient use from your new range hood, read the "Range Hood Use" section. RANGE HOOD USE The range hood is designed to remove smoke, cooking vapors, and odors from the cooktop area. For best results, start the hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen. The hood controls are located on the front panel of the range hood. Range Hood Controls A B C D A. Light On/Off button B. Blower On/Off and minimum speed button C. Blower medium speed button D. Blower maximum speed button Operating the light The Light On/Off button controls both lights. Press once for On and again for Off. Operating the blower The blower buttons turn the blower on/off and control the blower speed and sound level for quiet operation. The speed can be changed anytime during fan operation by pressing the desired blower speed button. Press the blower On/Off button a second time to turn the blower off. A B C D A. Blower and light touch control B. LED lamps C. Filter retainer D. Grease filter 14