Xbox 52V-00088 User Guide - Page 20

Connect Your Headset to Your Controller To connect your headset: 1 Turn down the volume by rotating the volume control all the way to the left. Insert the 2.5-mm headset connector into the controller expansion port at the back of your game controller. english 2 Put on your headset and adjust the microphone. NOTE Correct placement of the headset and microphone is critical to using your headset successfully. Make sure the headset goes over the top of your head, not around the back of your head. You may rotate the microphone and earpiece to your right or left side. Position the microphone about one inch (2.54 cm) from your mouth and off to one side. This will ensure that it doesn't transmit your breathing into a chat session. As you adjust the microphone, make sure the microphone opening is pointed toward your mouth and not rotated on its axis. 3 Now the headset is ready for a game or chat session. Start your game or chat and turn the volume up to a comfortable level. Use Your Headset To temporarily turn off voice transmission, slide the mute switch on the headset control. To adjust the listening volume of the headset, rotate the volume control knob. For more information about using your Xbox 360 Headset with a particular game, see your game manual. To chat and send voice messages, you need an Xbox LIVE membership. IMPORTANT To prevent damage to your headset, avoid sitting or stepping on the headset, its cable, or the cable connector. Hearing Loss Extended exposure to high volumes when using a headset may result in temporary or permanent hearing loss. Some unapproved third-party headsets may produce higher sound levels than approved Xbox 360 Headsets. 20