Xerox 1235/DX Network Guide - Page 12
Next>, Have Disk, Browse, Share Name, Finish, Advanced, Features and Troubleshooting Manual
UPC - 042215474542
View all Xerox 1235/DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11. Click OK. The Wizard will return you to the previous dialog. Verify that the port name you entered is in the list and is correct. The check box to the left of the port name must be checked; if it is not, check it, then select Next>. 12. Insert your printer CD-ROM into your computer's CD-ROM drive and click Have Disk. 13. Click the Browse button and select the directory containing the Windows NT drivers (:\instal\winnt40), then click Open. 14. Select the *.INF file, then click OK. 15. The Wizard will return you to the previous dialog. Verify that the path and file name are correct and click OK. 16. At the next dialog, enter a name for the printer and select whether you want that printer to be the default, then click Next>. 17. If the printer will not be shared, click Next>. To share the printer, enter a Share Name, check the share checkbox, then click Next>. 18. At the next dialog it is recommended that you print a Test Print. Click Finish. 19. Wait for the Test Print to print. A new dialog will ask for confirmation of the Test Print; click Yes. 20. Send a print job to the printer. 21. Check the print job for print-quality. If print-quality problems exist, use the print-quality section of your printer's Advanced Features and Troubleshooting Manual to correct the problem. 22. If your print job did not print, see the Troubleshooting section for your operating system in the Technical Information Guide to correct the problem.