Xerox 1235/DX Network Guide - Page 20
Novell NetWare 3.1x, 4.1x, 5.x Networks, Quick setup
UPC - 042215474542
View all Xerox 1235/DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Novell NetWare 3.1x, 4.1x, 5.x Networks Note If you use NetWare 4.x or 5.x and print using NDPS/NEPS, Xerox provides a Xerox NDPS/NEPS solution. This is available from the Xerox web site at: http://www.xerox.com/officeprinting. Quick setup 1. Print the Configuration Sheet. Details are in this document in Appendix A: Print the Configuration Sheet. 2. Check the Configuration Sheet and verify that Novell enable=On and correct Frame Type is set. 3. Install print drivers from your printer's CD-ROM and then install CentreWare DP from the Printer Management Software CD-ROM on a Windows-based workstation. Details for this are found in the Instruction Booklet included with each CD-ROM. 4. Run the CentreWare DP application and choose Setup Wizard from the Printer menu. NetWare 3.1x users should select the bindery server install and follow the Setup Wizard steps. NetWare 4.1x users should select the NDS install and follow the Setup Wizard steps. 5. Send a print job to the printer. 6. Check the print job for print-quality. If print-quality problems exist, use the print-quality section of your printer's Advanced Features and Troubleshooting Manual to correct the problem. 7. If your print job did not print, see the Troubleshooting section for your operating system in the Technical Information Guide to correct the problem. 8. If you want your printer to service more than one queue, proceed to the next section entitled Advanced Setup.