Xerox 2006NPC DocuColor 20006 Copy Features - Page 10

Loading Envelopes in the Bypass Tray

Page 10 highlights

22. Copy Features Loading Envelopes in the Bypass Tray All envelopes must be fed through the Bypass Tray. Open the flap and insert the envelope, one at a time, into the Bypass Tray as shown below. 0302508A-W O L Follow these guidelines when printing onto envelopes to help minimize potential jams and other problems: • Do not use envelopes that have tape seals. If you are using an envelope with a glue seal, make sure it is dry before use. • Only use landscape (horizontal) type envelopes (more than 90 mm wide, and more than 143 mm long with the flap open). Portrait (vertical) type envelopes may not be used. • Insert envelopes with the flap facing out and the glue side down. • Poor quality envelopes may crease, and may not print properly. 22-10 Xerox DocuColor 2006

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

22. Copy Features
Xerox DocuColor 2006
22–10
Loading Envelopes in the Bypass Tray
All envelopes must be fed through the Bypass Tray. Open the flap and insert
the envelope, one at a time, into the Bypass Tray as shown below.
Follow these guidelines when printing onto envelopes to help minimize
potential jams and other problems:
Do not use envelopes that have tape seals. If you are using
an envelope with a glue seal, make sure it is dry before use.
Only use landscape (horizontal) type envelopes (more than
90 mm wide, and more than 143 mm long with the flap
open). Portrait (vertical) type envelopes may not be used.
Insert envelopes with the flap facing out and the glue side
down.
Poor quality envelopes may crease, and may not print
properly.
0302508A-W OL