Xerox 2006NPC DocuColor 20006 Copy Features - Page 19

22. Copy Features Advanced Features The Advanced Features option includes the following: • Output - to change the tray that your copies output to. The option can be set to either the Exit Tray, the left-hand side output tray, or the Top Tray, the tray above the printer where print jobs are output. • If the Sorter/Stacker option is attached, there are other output selections available. Refer to the section Determining Output with the optional Sorter/Stacker for additional information. • Erase - to set an erase value from 0 - 50 mm for the following dimensions on your copy output: • Horizontal • Vertical • Center The DocuColor 2006 copier/printer automatically creates a 4 mm border on every copy. This is not an erase feature and can not be deleted. • 2-Sided - to produce double sided output, output with images on both the front and back sides, from single sided input. The following orientation options are available for the 2-Sided feature: • Portrait - to have to images flip along the long edge of the output. • Landscape - to have the images flip along the short edge of the output. • 2 Up - to copy two images onto a single page. The following image positions are available for the 2 Up feature: • ON (L➙R) - to position the images in order from left to right. • ON (R➙L) - to position the images in order from right to left. You can not use the 2 Up feature with the following: • 2-Sided option • Auto Paper Supply option • Auto Reduce/Enlarge option The 2-Sided feature and the 2 Up feature are available only if you have a Document Feeder. Xerox DocuColor 2006 22-19