Xerox 2006NPC DocuColor 2006 Tools Mode - Page 12
Auto Mode Change, Use the Arrow Buttons to highlight the Auto Mode Change option.
UPC - 042215475440
View all Xerox 2006NPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
23. Tools Mode Auto Mode Change The DocuColor 2006 can enter copy mode when originals are loaded into the Document Feeder or the platen cover is opened if the Auto Mode Change option is set to Copy. You do not need to press the Copy button to enter copy mode. For further information on using the Copy button to enter copy mode, go to the Basic Copying chapter. Use the following procedure to access the Auto Mode Change option: 1. Press the Tools button to display the Tools Main Menu on the Copier Screen. 2. Using the Arrow Buttons highlight the Admin Menu option. 3. Press the Select button. Password Input is displayed on the Copier Screen. 4. Using the Numeric Keypad, enter your Administrator Password. The numbers displays as asterisks (*). If you make a mistake while entering a password, press the Clear (C) button. 5. Once the correct password is entered, the Administrator Menu is displayed on the Copier Screen. 6. Use the Arrow Buttons to highlight the Auto Mode Change option. 7. Press the Select button. Auto Mode Change selection is displayed on the Copier Screen. 8. Use the Arrow Buttons to highlight one of the following: • Off to switch the Auto Mode Change feature off. Copy mode can only be entered by pressing the Copy button. • On to switch the Auto Mode Change feature on. The copier/printer enters copy mode when originals are loaded into the Document Feeder or the scanner cover is open. 9. Press the Select button. The Administrator Menu is displayed on the Copier Screen. 10. Press the Exit button. The Tools Main Menu is displayed on the Copier Screen. 11. Press the Tools button to exit Tools Mode. 23-12 Xerox DocuColor 2006