Xerox 2006NPC DocuColor 2006 Tools Mode - Page 19
Admin Password
UPC - 042215475440
View all Xerox 2006NPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
23. Tools Mode Admin Password The password for the machine supervisor is set to 9999 when the machine ships from the factory. For secure control of the machine, please change this password as soon as possible. The Administrator password can not be checked after it is entered. Record this password so that it is not forgotten. Use the following steps to change the Administrator Password: 1. Press the Tools button to display the Tools Main Menu on the Copier Screen. 2. Using the Arrow Buttons highlight the Admin Menu option. 3. Press the Select button. Password Input is displayed on the Copier Screen. 4. Using the Numeric Keypad, enter your Administrator Password. The numbers display as asterisks (*). If you make a mistake while entering a password, press the Clear (C) button. 5. Once the correct password is entered, the Administrator Menu is displayed on the Copier Screen. 6. Use the Arrow Buttons to highlight the Administrator Password option. 7. Press the Select button. 8. Use the Numeric Keypad to enter a four-digit password. Each entered number displays as an asterisk (*). If you make a mistake while entering the password, press the Clear (C) button. 9. Use the Numeric Keypad to enter the same four-digit password as confirmation. Each entered number displays as an asterisk (*). If the password entered as confirmation is identical to the first password entered, the password is changed and the Administrator Menu is displayed on the Copier Screen. If the password entered as confirmation is different from the first password entered, you must enter the password again. Repeat steps 8 and 9. 10. Press the Exit button. The Tools Main Menu is displayed on the Copier Screen. 11. Press the Tools button to exit Tools Mode. Xerox DocuColor 2006 23-19