Xerox 2006NPC DocuColor 2006 Win2000 User Software Installation - Page 23
Create new port, TCP/IP Port, Printer Name, IP address, Custom, Settings, Queue Name
UPC - 042215475440
View all Xerox 2006NPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
10. Installing user software in a Windows 2000 environment 3. Select the Create new port radio button. 4. Select the TCP/IP Port option. The TCP/IP Printer Port wizard is displayed. 5. Select Next. 6. Enter the Printer Name or IP address. When you enter the information, it is also displayed in the Port Name field. Select Next to display the Additional Port Information. 7. Select the Custom radio button and the Settings button. The Configure Standard TCP/IP Port Monitor screen is displayed. 8. Select the LPR radio button in the Protocol section to activate the LPR Settings fields. 9. Enter one of the names listed below in lowercase letters in the Queue Name field: • print (generally used) • hold • direct 10. Select the SNMP Status Enabled checkbox. 11. Select OK to redisplay the Additional Port Information screen. 12. Select Next to display the wizard completion screen. 13. Select Finish. The Ports property tab shows the new port configuration. The SPM searches for the printer and configures the printer, based on the SNMP responses. 14. To confirm the connection, print a test page. Select the General tab and select the Print Test Page button. When you print, your files are transmitted over the SNMP connection to the printer. With setup complete, you are ready to print your jobs. Xerox DocuColor 2006 10-23