Xerox 3117 User Guide - Page 18
Cancel() button, Printing demo Manual feeding, Source, Canceling print job, Toner Save mode - printer toner
UPC - 095205220537
View all Xerox 3117 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
LED Description If you press the button in Ready mode, this LED is on 1 and the Toner Save mode is enabled. If you press this button once again, this LED is off and the Toner Save mode is disabled. If the and LEDs blink, your system has some problems. To solve the problem, see "Troubleshooting Error Messages" on page 5.17 Cancel( ) button Function Description Printing demo page In Ready mode, press and hold this button for about 2 seconds until all LEDs blink slowly, and release. Manual feeding Press this button each time you load a sheet of paper in the tray, when you select Manual Feed for Source from your software application. For detailed information, see "Using Manual Feed Mode" on page 3.7. Canceling print job Press this button during printing. The LED blinks while the print job is cleared from both the printer and the computer, and then return to Ready mode. This may take some time depending on the size of the print job. In Manual Feed mode, you can't cancel the print job by pressing this button. For detailed information, see "Using Manual Feed Mode" on page 3.7. Toner Save mode on/off In Ready mode, press this button to turn the Toner Save mode on or off. For detailed information, see Software User Guide and page 4.5. INTRODUCTION 1.7