Xerox 3600DN User Guide

Xerox 3600DN - Phaser B/W Laser Printer Manual

Get Xerox 3600DN - Phaser B/W Laser Printer PDF manuals and user guides
UPC - 095205742664
View all Xerox 3600DN manuals
Add to My Manuals
Save this manual to your list of manuals

Xerox 3600DN manual content summary:

  • Xerox 3600DN | User Guide - Page 1
  • Xerox 3600DN | User Guide - Page 2
    manual. © 2008 by Xerox Corporation. All rights reserved. • Phaser 3600, Phaser 3600/B, Phaser 3600/N and Phaser 3600/DN are trademarks of Xerox Corporation. • Xerox and Xerox logo are trademarks of Xerox • Microsoft, Windows, Windows 2000, Windows NT 4.0, Windows XP, and Windows 2003 are registered
  • Xerox 3600DN | User Guide - Page 3
    Changing the display language ...2.9 3. Software overview Supplied software ...3.1 Printer driver features ...3.2 System requirements ...3.2 4. Network setup (Phaser 3600/N, Phaser 3600/DN only) Introduction ...4.1 Supported operating systems ...4.1 Configuring TCP/IP ...4.2 Configuring EtherTalk
  • Xerox 3600DN | User Guide - Page 4
    ...7.1 Accessories ...7.1 How to purchase ...7.1 8. Maintenance Printing information page ...8.1 Cleaning the printer ...8.1 Maintaining the print cartridge ...8.3 Maintenance parts ...8.6 9. Troubleshooting Clearing paper jams ...9.1 Troubleshooting checklist ...9.7 Understanding the Status LED
  • Xerox 3600DN | User Guide - Page 5
    that has adequate strength to support the weight of the machine. • Always locate the machine in an area that has adequate ventilation and room for servicing. • Always unplug this equipment from the electrical outlet before cleaning. Maintenance Information NOTE: Your Xerox machine is equipped with
  • Xerox 3600DN | User Guide - Page 6
    from the electrical outlet(s). Contact anauthorized Xerox Service Representative to correct the problem: The equipment emits unusual odours or part of the machine is damaged. WARNING: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instruction
  • Xerox 3600DN | User Guide - Page 7
    about ozone, please request the Xerox publication Ozone by calling 1-800-828-6571 in the United States and Canada. In other markets please contact your authorized local dealer or Service Provider. For Consumables • Store all consumables in accordance with the instructions given on the package or
  • Xerox 3600DN | User Guide - Page 8
    or modifications to this equipment not specifically approved by the Xerox Corporation may void the user's authority to operate this equipment. WARNING DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  • Xerox 3600DN | User Guide - Page 9
    Young should be given attribution as the author of the parts of the library used. This can be in the form cryptographic related. 4. If you include any Windows specific code (or a derivative thereof) from the NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
  • Xerox 3600DN | User Guide - Page 10
    your Xerox sales representative (1-800-ASK-XEROX) to determine whether this Xerox product is part of the program. For more information about Xerox environmental programs, visit www.xerox.com/environment or for recycling and disposal information, contact your local authorities. In the United States
  • Xerox 3600DN | User Guide - Page 11
    For recycling and disposal information, contact your local authorities. In the United States, you may also refer to the Electronic Industries Alliance web in relation to this Xerox product and supplies, please contact the following customer help lines: USA: 1-800 828-6571 Canada: 1-800 8286571 Europe
  • Xerox 3600DN | User Guide - Page 12
    in various environments • You can print in Windows 2000/XP/Vista/2003. • Your printer is compatible with Macintosh. • Your printer comes with both Parallel and USB interfaces. • You can also use a network interface. The Phaser 3600/N or Phaser 3600/DN comes with a built-in network interface, 10
  • Xerox 3600DN | User Guide - Page 13
    . Front view Printer overview * The figure above shows an Phaser 3600/DN with all available options. 1 output tray 2 control panel 3 control board cover 4 handle 5 power switch 6 paper level indicator 7 optional tray 3 8 tray 2 9 Tray1(MPT) 10 Tray1(MPT) handle 11 top cover 12 output support
  • Xerox 3600DN | User Guide - Page 14
    Rear view Control panel overview / * The figure above shows an Phaser 3600/DN with all available options. 1 rear cover 2 duplex unit 3 network port 4 USB port 5 parallel port 6 power receptacle 7 power switch 1 Start/Stop: Cancel an operation at any time; resume printing. 2 Back: Sends you back
  • Xerox 3600DN | User Guide - Page 15
    information on printer driver properties and instructions for setting up the properties for printing. To access a printer driver help screen, click Help from the printer properties dialog box. Xerox website If you have Internet access, you can get help, support, printer drivers, manuals, and order
  • Xerox 3600DN | User Guide - Page 16
    Maintenance Parallel Setup USB Setup Panel Lockout Secure Print Low Toner Cm or inches Clear Setting Emulation (See page 2.7.) Emulation Type Setup Hex Mode a. Available when the installed memory is larger than 128 MB. b. Available when duplex unit is installed. c. Available when optional tray
  • Xerox 3600DN | User Guide - Page 17
    or decrease the value in 0.1 mm increments. The margins may differ according to the paper size and printing orientation. You can select the unit either millimeters or inches. See Cm or inches item on page 2.7 to configure the unit. • Top Margin: Set the top margin, from 0.0 to 250 mm. • Left Margin
  • Xerox 3600DN | User Guide - Page 18
    2 3 5 Long Edge in the Landscape orientation Duplex Margin 3 5 Short Edge in the Portrait orientation paper tray. Each tray has 9 items to adjust margins. You can increase or decrease the value from -3.5 to 3.5 mm at intervals of 0.5 mm. The defaults are 0 mm. • Simplex Image: Print a test
  • Xerox 3600DN | User Guide - Page 19
    relating to print material input and output, as well as the specific print material you are using with your printer. Item Copies Tray 1MPT Size Tray 1MPT Type Tray 2 Type Tray 3 Type Paper Source Explanation Values: 1 ~ 999 Set the default number of copies by selecting any number from 1 to 999
  • Xerox 3600DN | User Guide - Page 20
    Use the Light toner density setting to save toner. System Setup menu Use the System Setup menu to configure a variety of printer features. Item and the printer will remain off-line until you insert the correct paper. • On: If a paper mismatch occurs, an error message will display. The printer will
  • Xerox 3600DN | User Guide - Page 21
    . Item Maintenance Parallel Setup USB Setup Panel Lockout Explanation This item allows you to maintain your printer. • Clean Drum: Cleans the OPC drum of the cartridge and produces a cleaning sheet with toner debris on it. • Clean Fuser: Cleans the fuser unit inside of the printer and produces
  • Xerox 3600DN | User Guide - Page 22
    can set the unit in the machine with your preferences either in centimeters or inches. This selection affects the following menus. • Simplex Margin in Layout menu. • Custom Size of Tray 1MPT Size in Paper menu. This menu item allows you to restore the printer's factory default settings. Emulation
  • Xerox 3600DN | User Guide - Page 23
    menu (Phaser 3600/N, Phaser 3600/DN only) This menu lets you configure the network interface installed in your printer. You can reset the network interface and print a configuration page. Item TCP/IP EtherTalk NetWare Explanation Values: DHCP, BOOTP, Static This item allows you to manually set
  • Xerox 3600DN | User Guide - Page 24
    default settings for the network configuration. This setting will only take effect after you have reset the printer select any method which the authentication server supports among EAP-MD5, EAP-MSCHAPv2 and whether or not you use the SLP (Service Location Protocol) network connection. • Off: You
  • Xerox 3600DN | User Guide - Page 25
    fonts and graphics in the PostScript language. • SetIP: Use this program to set your printer's TCP/IP addresses. (Phaser 3600/N, Phaser 3600/DN only) • User Guide in PDF. Linux • Printer driver: Use this driver to run your machine from a Linux computer and print documents. Mac OS • PostScript
  • Xerox 3600DN | User Guide - Page 26
    Printer driver features Your printer drivers support the following standard features: • Paper source selection • Paper size, orientation and media type • Number of copies In addition, you can use various special printing features. The following table shows a general overview of features supported
  • Xerox 3600DN | User Guide - Page 27
    4 Network setup (Phaser 3600/N, Phaser 3600/DN only) This chapter gives you step-by-step instructions for setting up your printer for network connections. This chapter includes: • Introduction • Supported operating systems • Configuring TCP/IP • Configuring EtherTalk • Configuring IPX frame types •
  • Xerox 3600DN | User Guide - Page 28
    DNS addresses. There are several ways in which your printer can be assigned a TCP/IP address, depending on your network. • Static addressing: A TCP/IP address is assigned manually by the system administrator. • Dynamic addressing via BOOTP/DHCP (default setup (Phaser 3600/N, Phaser 3600/DN only)>
  • Xerox 3600DN | User Guide - Page 29
    the network configuration You can return the network configuration to its default settings. 1 Press Menu until Network appears on the bottom line algorithms to encode the UserID and passwords. • PEAP: PEAP (Protected EAP). 5 Enter user name and passcode using Up/ Phaser 3600/N, Phaser 3600/DN only)>
  • Xerox 3600DN | User Guide - Page 30
    Press the Up/down arrow buttons until On appears and press OK. Configuring SLP Your printer can use SLP (Service Location Protocol) which transmit the printing information through port 427. To enable SLP, buttons until On appears and press OK. 4.4
  • Xerox 3600DN | User Guide - Page 31
    quantities of print media, ensure that it meets the requirements specified in this user's guide. Caution Using print media that does not meet these specifications may cause problems, requiring repairs. Such repairs are not covered by Xerox's warranty or service agreements. 5.1
  • Xerox 3600DN | User Guide - Page 32
    (20 lb bond) paper for Tray 2, optional tray 3 • 100 sheets for Tray 1(MPT) 10 sheets of 75 g/m2 (20 lb) in Tray 1(MPT) 50 sheets of 75 g/m2 (20 lb) in Tray 1(MPT) 25 sheets of 75 g/m2 (20 lb) in Tray 1(MPT) 10 sheets of 75 g/m2 (20 lb) in Tray 1(MPT) Note For duplex printing, A4, Letter
  • Xerox 3600DN | User Guide - Page 33
    paper specifically recommended for use in laser printers. • Avoid using the following media types: - Paper paper. • Load special media types one sheet at a time through tray 1(MPT) to avoid paper with clasps, snaps, windows, coated lining, self- , and may even damage the fuser. • For the best print
  • Xerox 3600DN | User Guide - Page 34
    only transparencies designed for use in laser printers. • Transparencies used in the printer must be able to withstand 200° C (392° F), the printer's fusing temperature. • Place them on a flat surface after removing them from the printer. • Do not leave them in paper tray for long periods of time
  • Xerox 3600DN | User Guide - Page 35
    problems with paper feed, turn the paper around. Note that the print quality is not guaranteed. Changing the size of the paper in Tray 2 To load longer sizes of paper, such as Legal-sized paper, you need to adjust the paper guides to extend paper tray. 1 4 2 3 1 paper length guide 2 support guide
  • Xerox 3600DN | User Guide - Page 36
    towards you and pull tray1(MPT) extension to hold longer paper. 2 After inserting paper into tray, adjust the support guide so that it lightly touches the paper stack. 2 If you are using paper, flex or fan the edge of the paper stack to separate the pages before loading. For transparencies, hold
  • Xerox 3600DN | User Guide - Page 37
    (MPT) paper width guides and adjust them to the width of the paper. Do not force too much, or the paper will be bent, which will result in a paper jam or skew. • Make sure to open the rear cover when you print on transparencies. If not, they may tear while exiting the printer. Using manual feed
  • Xerox 3600DN | User Guide - Page 38
    cover (face up) and the output tray (face down). 1 2 1 rear cover 2 output tray The printer sends output to the output tray by default. To use the output tray, make sure that the rear cover is closed. Notes • If paper coming out of the output tray has problems, such as excessive curl, try printing
  • Xerox 3600DN | User Guide - Page 39
    tray1(MPT) to the rear cover provides a straight paper path. Using the rear cover might improve the output quality with special print media. To use the rear cover, open it by pulling down. Caution The fuser area inside the rear cover of your printer becomes very hot when in use. Take care when
  • Xerox 3600DN | User Guide - Page 40
    follows: 1 Click the Windows Start button. 2 For Windows 2000, select Settings and then Printers. For Windows XP/2003, select Printers and Faxes. For Windows Vista, select Control Panel > Hardware and Sound > Printers. 3 Double-click the Xerox Phaser 3600 PCL 6 or Xerox Phaser 3600 PS icon. 4 From
  • Xerox 3600DN | User Guide - Page 41
    500 sheet tray. You can print documents on various sizes and types of print materials. 097N01673 Optional duplex If you are want to automatically print on both sides of paper, you can attach an additional duplex unit. 097S03756 Memory DIMM Extends your printer's memory capacity. • 097S03759
  • Xerox 3600DN | User Guide - Page 42
    for high-quality and economical printing. This chapter includes: • Printing information page • Cleaning the printer • Maintaining the print cartridge • Maintenance parts Printing information page From the printer's control panel, you can print pages that give detailed information about the
  • Xerox 3600DN | User Guide - Page 43
    Drum or Clean Fuser appears and press OK. Your printer automatically picks up a sheet of paper from the tray and prints out a cleaning sheet with dust or toner particles on it. 5 Reinsert the print cartridge and close the top cover. 6 Plug in the power cord and turn the printer on. 8.2
  • Xerox 3600DN | User Guide - Page 44
    the level of toner left in the cartridge. If you are having print quality problems, this can help you determine if the problem is caused by low toner. 1 Press Menu until System Setup appears on the bottom line of the display press OK. 2 Press the Up/down arrow buttons until Maintenance appears and
  • Xerox 3600DN | User Guide - Page 45
    in cold water. Hot water sets toner into fabric. 4 Hold the print cartridge by the handle and slowly insert the cartridge into the opening in the printer. 5 Tabs on the sides of the cartridge and corresponding grooves within the printer will guide the cartridge into the correct position until it
  • Xerox 3600DN | User Guide - Page 46
    the Replace Toner message will remain for reminding you that a new cartridge needs to be installed for quality. Caution Once you have selected On, this setting will be permanently written to the memory of the cartridge, and this menu item will be removed from the Maintenance menu. 8.5
  • Xerox 3600DN | User Guide - Page 47
    print quality and paper feed problems resulting from worn parts and to maintain your printer in top working condition the following items will need to be replaced at the specified number of pages or when the life span of each item has expired. Items Yield (Average) Fuser unit Approx. 150,000
  • Xerox 3600DN | User Guide - Page 48
    error while using your printer. This chapter includes: • Clearing paper jams • Troubleshooting checklist • Understanding the Status LED • Understanding display messages • Print cartridge-related messages • Solving general printing problems • Solving print quality problems • Common Windows problems
  • Xerox 3600DN | User Guide - Page 49
    sure that all of the paper is properly aligned in Tray 2. 4 Remove the jammed paper from tray. If the paper does not move when you pull, or if you do not see the paper in this area, check the fuser area around the print cartridge. See page 9.3. 3 Insert Tray 2 into the printer until it snaps into
  • Xerox 3600DN | User Guide - Page 50
    Around the print cartridge Note The fuser area is hot. Take care when removing paper from the printer. 1 Open the top cover and pull the print cartridge out. 3 Remove the jammed paper by gently pulling it straight out. 2 Carefully lift up the guide feed. If you cannot find jammed paper, or if
  • Xerox 3600DN | User Guide - Page 51
    from the printer. 2 Gently pull the paper out of the output tray. In the duplex unit area If the duplex unit is not inserted correctly, a paper jam may occur. Make sure that the duplex unit is inserted correctly. Duplex jam 0 1 Open the top cover and pull the duplex unit out of the printer. If you
  • Xerox 3600DN | User Guide - Page 52
    duplex unit out of the printer. 4 Push the pressure levers upwards. 2 Open the rear cover. 3 Release the rear cover stopper, and fully open the rear cover, as shown. 1 1 pressure lever 5 While pushing the fuser lever to the right, open the fuser door. 1 6 Pull the jammed paper out. 2 1 fuser
  • Xerox 3600DN | User Guide - Page 53
    facing down in Tray 2 or optional tray 3, or facing up in tray 1(MPT). • If paper jams occur frequently when you print on A5-sized paper: Load the paper into the tray with the long edge facing the front of the tray. 10 Insert the duplex unit into the slot. In the printer properties window, set the
  • Xerox 3600DN | User Guide - Page 54
    • There is no paper in tray. Load paper in tray. • The printer has stopped printing due to a major error. Red • A minor error is occurring and the printer is waiting for the error to be cleared. When the problem is cleared, the printer resumes Blinking printing. • The print cartridge is low
  • Xerox 3600DN | User Guide - Page 55
    the printer properties does not match the paper you are loading. Load the correct paper in tray. Load Manually Press Stop Key Tray 1(MPT) is empty in manual feed mode. Load a sheet of print material and press Start/Stop. Low Heat Error Cycle Power There is a problem in the fuser unit. Unplug
  • Xerox 3600DN | User Guide - Page 56
    Locked Meaning There is a problem in the fuser unit. The output tray of the machine is full of paper. There is a problem in the fuser unit. Paper has jammed in the feeding area of tray. Paper has jammed in the fuser area. Paper has jammed in the paper exit area. The printer is printing jobs using
  • Xerox 3600DN | User Guide - Page 57
    for your printer. The print cartridge is almost empty. The toner in the cartridge has run out. The toner in the cartridge has run out. Install a print cartridge. Suggested solutions Install a Xerox-genuine print cartridge, designed for your printer. Take out the print cartridge and thoroughly
  • Xerox 3600DN | User Guide - Page 58
    . Check the power switch and the power source. Select Xerox Phaser 3600 PCL 6 or Xerox Phaser 3600 PS as your default printer. Close the printer cover. Clear the paper jam. See page 9.1. Load paper. See page 5.4. Install the print cartridge. Check the display message, add paper to tray 1(MPT), and
  • Xerox 3600DN | User Guide - Page 59
    is malfunctioning. Suggested solutions Remove excess paper from tray. If printing on special materials, use tray 1(MPT). Use only paper that meets printer specifications. If printing on special materials, use tray 1(MPT). Special print materials, such as thick paper, should not be printed using the
  • Xerox 3600DN | User Guide - Page 60
    the print cartridge. See page 8.4. Check the file to ensure that it does not contain blank pages. Contact a service representative. Solving print quality problems Dirt inside of the printer or improper paper loading may reduce print quality. See the table below to troubleshoot problems. Condition
  • Xerox 3600DN | User Guide - Page 61
    , install a new print cartridge. See page 8.4. • Parts of the printer may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages. • The fusing assembly may be damaged. Contact a service representative. Condition Background
  • Xerox 3600DN | User Guide - Page 62
    a new print cartridge. See page 8.4. • If the problem persists, the printer may require repair. Contact a service representative. Condition Curl Suggested solutions If the printed paper is curled or paper does not feed into the printer: • Turn over the stack of paper in tray. Also try rotating
  • Xerox 3600DN | User Guide - Page 63
    Options section to Installed. Common Linux problems Condition The machine does not print. Suggested solutions • Check if the printer driver is installed in your system. Open Unified Driver configurator and switch to the Printers tab in Printers configuration window to look at the list of
  • Xerox 3600DN | User Guide - Page 64
    and numbers are displayed normally at the Cover page. This problem is caused because the resolution setting in the printer driver may not be matched with that in Acrobat Reader. Make sure that the resolution setting in your printer driver matches that in Acrobat Reader. 9.17
  • Xerox 3600DN | User Guide - Page 65
    any static electricity once again. Installing a memory DIMM Your printer has a dual in-line memory module (DIMM) slot. Use this DIMM slot to install additional memory. Phaser 3600/B has 64 MB, and Phaser 3600N or Phaser 3600/DN has 128 MB of memory. The memory can be expanded to 512 MB. For
  • Xerox 3600DN | User Guide - Page 66
    printer driver. See the Software Section. 2 Click the Windows Start menu. 3 For Windows 2000, select Settings and then Printers. For Windows XP/2003, select Printers and Faxes. For Windows Vista, select Control Panel > Hardware and Sound > Printers. 4 Select the Xerox Phaser 3600 PS printer
  • Xerox 3600DN | User Guide - Page 67
    - 480 Mbps 1 port • Network Interface (Phaser 3600/N, Phaser 3600/DN only) - 10/100 Base TX OS compatibilitye • Windows 2000/XP/Vista/2003 • Various Linux OS • Mac OS 10.2 ~ 10.5 Options • 500-sheet tray • Duplex unit for Phaser 3600/B or Phaser 3600/N a. Print speed will be affected by
  • Xerox 3600DN | User Guide - Page 68
    2.9 problem, solve checklist 9.7 error messages 9.8 Macintosh 9.17 paper jams 9.1 printing 9.11 printing quality 9.13 Windows 9.15 Q quality problems 9.13 R rear cover, use 5.9 replacement parts 8.6 replacing, print cartridge 8.4, 8.5 S special print media, guidelines 5.3 specification, printer 11
  • Xerox 3600DN | User Guide - Page 69
    system requirements Mac OS 3.2 Windows 3.2 W Windows problems 9.15 2
  • Xerox 3600DN | User Guide - Page 70
    Software section
  • Xerox 3600DN | User Guide - Page 71
    SETIP (PHASER 3600/N, PHASER 3600/DN ONLY) Installing SetIP ...11 Using SetIP ...11 Chapter 3: BASIC PRINTING Printing a Document ...12 Printing to a file (PRN) ...13 Printer Settings ...13 Layout Tab ...14 Paper Tab ...14 Graphics Tab ...15 Extras Tab ...16 Troubleshooting Tab ...17 Printer Tab
  • Xerox 3600DN | User Guide - Page 72
    21 Fitting Your Document to a Selected Paper Size 21 Using Watermarks ...22 Using an WINDOWS POSTSCRIPT DRIVER Printer Settings ...24 Advanced ...24 Using Help ...24 Chapter 6: USING UTILITY APPLICATIONS Using Printer Settings Utility 25 Using Onscreen Help ...25 Opening the Troubleshooting Guide
  • Xerox 3600DN | User Guide - Page 73
    printer driver 32 Setting Up the Printer ...33 For a Network-connected Macintosh 33 For a USB-connected Macintosh 33 Installable Options ...34 Printing ...34 Printing a Document ...34 Changing Printer Settings 35 Printing Multiple Pages on One Sheet of Paper 36 Duplex Printing (Phaser 3600/DN
  • Xerox 3600DN | User Guide - Page 74
    printer in use. A printer driver is software that lets your computer communicate with your printer. The procedure to install drivers OK. If you use Windows Vista, click Start → All programs → Accessories → Run, and type X:\Setup.exe. If the AutoPlay window appears in Windows Vista, click Run Setup
  • Xerox 3600DN | User Guide - Page 75
    the end of the installation. • The installation window that appears in this User's Guide may differ depending on the printer and interface in use. 5 After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click
  • Xerox 3600DN | User Guide - Page 76
    No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation. • The installation window that appears in this User's Guide may differ depending on the printer and interface in use. NOTE: You can change the desired installation folder
  • Xerox 3600DN | User Guide - Page 77
    find a shared network printer (UNC Path), select Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse on-line guide. 6 After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select
  • Xerox 3600DN | User Guide - Page 78
    setup is complete, if your printer driver doesn't work properly, reinstall the printer driver. See "Reinstalling Printer Software" on page 10. Custom Installation You can choose individual components to install and set a specific IP address. 1 Make sure that the printer is connected to your network
  • Xerox 3600DN | User Guide - Page 79
    set a specific IP address on a specific network printer, click the Set IP Address button. The Set IP Address window appears. Do as follows: a. Select a printer to be set with a specific IP address from the list. b. Configure an IP address, subnet mask, and gateway for the printer manually and click
  • Xerox 3600DN | User Guide - Page 80
    . b. If the test page prints out correctly, click Yes. If it doesn't, click No to reprint it. 6 When the reinstallation is done, click Finish. Removing Printer Software 1 Start Windows. 2 From the Start menu select Programs or All Programs → your printer driver name → Maintenance. 3 Select Remove
  • Xerox 3600DN | User Guide - Page 81
    Page. • The refreshed list doesn't show your printer, click enter your network printer card's IP address, subnet mask, default gateway, and then click Apply. 3 Click OK to confirm the settings. 4 Click Exit to close the SetIP program. 11 Using SetIP (Phaser 3600/N, Phaser 3600/DN only)
  • Xerox 3600DN | User Guide - Page 82
    to a file (PRN) • Printer Settings - Layout Tab - Paper Tab - Graphics Tab - Extras Tab - Troubleshooting Tab - Printer Information Page - Using a Favorite Setting - Using Help Printing a Document NOTES: • Your printer driver Properties window that appears in this User's Guide may differ depending
  • Xerox 3600DN | User Guide - Page 83
    , you can review and change the settings needed for your print job. Your printer properties window may differ, depending on your operating system. This Software User's Guide shows the Properties window for Windows XP. Your printer driver Properties window that appears in this User's Guide may differ
  • Xerox 3600DN | User Guide - Page 84
    printer properties. 1 2 Paper Tab Use the following options to set the basic paper handling specifications when you access the printer of paper you loaded in tray. If the required size is not listed in the Size box, click Custom. When the Custom Paper Setting window appears, set the paper size
  • Xerox 3600DN | User Guide - Page 85
    is set to the corresponding paper tray. Use Manual Feeder when printing on special materials like envelopes and transparencies. You have to load one sheet at a time into Manual Tray or Multi-Purpose Tray. If the paper source is set to Auto Selection, the printer automatically picks up print material
  • Xerox 3600DN | User Guide - Page 86
    printer driver. - Download as Bitmap: When this option is selected, the driver will download take the place of preprinted forms and letterhead paper. For details, see "Using Overlays" on memory. If, however, you use fonts in your document that are very different from those resident in the printer
  • Xerox 3600DN | User Guide - Page 87
    Job Setting dialog allows you to select how to print or save the printing file. Some printers require optional memory to support this feature. Troubleshooting Tab Click the Troubleshooting tab to access the following feature: 1 2 Using Onscreen Help File • For more information about Job Setting
  • Xerox 3600DN | User Guide - Page 88
    and click Delete. You can also restore the printer driver's default settings by selecting Printer Default from the list. Using Help Your printer has a help screen that can be activated by clicking the Help button in the printer properties window. These help screens give detailed information about
  • Xerox 3600DN | User Guide - Page 89
    printer driver Properties window that appears in this User's Guide may differ depending on the printer in use. However the composition of the printer properties window the sheet. 5 Click the Paper tab, select the paper source, size, and type. 6 Click OK and print the document. 19 Advanced
  • Xerox 3600DN | User Guide - Page 90
    . You can complete the poster by pasting the sheets together. Printing Booklets 8 9 8 9 This printer feature allows you to print your document on both sides of the paper and arranges the pages so that the paper can be folded in half after printing to produce a booklet. 1 To change the print
  • Xerox 3600DN | User Guide - Page 91
    . NOTE: If your printer does not have a duplex unit, you should complete the printing job manually. The printer prints every other page of the document first. After printing the first side of your job, the Printing Tip window appears. Follow the onscreen instructions to complete the printing
  • Xerox 3600DN | User Guide - Page 92
    options. You can select the font name, style, size, or grayscale level from the Font Attributes section and set the angle of the watermark you exit the Print window. Deleting a Watermark 1 To change the print settings from your software application, access printer properties. See "Printing
  • Xerox 3600DN | User Guide - Page 93
    and letterhead paper. Rather window, click Create Overlay. 5 In the Create Overlay window, type a name of up to eight characters in the File name box. Select the destination path, if necessary. (The default selected overlay downloads with your print 1 In the printer properties window, click the Extras
  • Xerox 3600DN | User Guide - Page 94
    , you can review and change the settings needed for your print job. Your printer properties window may differ, depending on your operating system. This Software User's Guide shows the Properties window for Windows XP. Your printer driver Properties window that appears in this User's Guide may differ
  • Xerox 3600DN | User Guide - Page 95
    Opening the Troubleshooting Guide Using the troubleshooting guide, you can view solutions for error status problems. Double click the Status Monitor icon on the Windows task bar. Or, from the Start menu, select Programs or All Programs → your printer driver name → Troubleshooting Guide. Double click
  • Xerox 3600DN | User Guide - Page 96
    section of Printer Specifications in your Printer User's Guide. • If you need to know the exact name of your printer, you can check the supplied CD-ROM. Setting Up a Host Computer 1 Start Windows. 2 From the Start menu select Printers and Faxes. 3 Double-click your printer driver icon. 4 From
  • Xerox 3600DN | User Guide - Page 97
    the Unified Linux Driver 1 Make sure that you connect your machine to your computer. Turn both the computer and the machine on. 2 When the Administrator Login window appears, type in root in the Login field and enter the system password. NOTE: You must log in as a super user (root) to install
  • Xerox 3600DN | User Guide - Page 98
    installation instruction above, but type [root@localhost Linux]# ./ uninstall.sh on the terminal screen. Uninstalling the Unified Linux Driver 1 When the Administrator Login window appears, type in root in the Login field and enter the system password. NOTE: You must log in as a super user (root
  • Xerox 3600DN | User Guide - Page 99
    . You can also click the Startup Menu icon and select Xerox Unified Driver and then Unified Driver Configurator. 2 Press each button on the Modules pane to switch to the corresponding configuration window. Printers Configuration button Scanners Configuration button Ports Configuration button You can
  • Xerox 3600DN | User Guide - Page 100
    the various properties for your machine as a printer. 1 Open the Unified Driver Configurator. If necessary, switch to Printers configuration. 2 Select your machine on the available printers list and click Properties. 3 The Printer Properties window opens. The following five tabs display at the
  • Xerox 3600DN | User Guide - Page 101
    and click Properties. Click. 4 Change the printer and print job properties. The following four tabs display at the top of the window. •General - allows you to change the paper size, the paper type, and the orientation of the documents, enables the duplex feature, adds start and end banners, and
  • Xerox 3600DN | User Guide - Page 102
    For Mac OS 10.2 or higher, double-click the Xerox Phaser 3600_OSX icon. 8 Enter the password and click OK. 9 Click Continue. 10 Select Easy Install and click Install. 11 After the installation is finished, click Quit. Uninstalling the printer driver 1 Connect your machine to the computer using the
  • Xerox 3600DN | User Guide - Page 103
    : Some printers do not support a network interface. Before connecting your printer, make sure that your printer supports a network interface by referring to Printer Specifications in your Printer User's Guide. Mac OS 10.2 or higher 1 Follow the instructions on Installing printer driver for Macintosh
  • Xerox 3600DN | User Guide - Page 104
    5 Configure each items in Installable Options window. •Tray n: If the machine have optional tray n, you have to check the tray name. •Duplex Unit: If the machine has duplex unit, you have t o check this item. •Printer Memory: If you installed additional printer memory, you have to configure the size
  • Xerox 3600DN | User Guide - Page 105
    setting. If you set the passcode a specific file, you must enter the passcode to print or delete the job. NOTES: • This feature can be supported on a computer with Mac 10.3 or higher. • You can use this mode only when the machine have 128 MB or higher memory. 35 Using Your Printer with a Macintosh
  • Xerox 3600DN | User Guide - Page 106
    to duplex print order. •Fit to Page: This printer feature allows you to scale your print job to any selected paper size regardless of the digital document size. This can be useful when you want to check fine details on a small document. •Paper Type: Set Type to correspond to the paper loaded in tray
  • Xerox 3600DN | User Guide - Page 107
    Duplex Printing (Phaser 3600/DN only) You can print on both sides of the paper. Before printing in the duplex mode, decide on and the printer prints on both sides of the paper. CAUTION: If you have selected duplex printing and then try to print multiple copies of a document, the printer may not
  • Xerox 3600DN | User Guide - Page 108
    31 M Macintosh driver install 32 printing 34 setting up the printer 33 N n-up printing Macintosh 36 Windows 19 O orientation, print 31 Windows 14 overlay create 23 delete 23 print 23 P Paper properties, set 14 paper size, set 14 print 31 paper source, set 31 Windows 15 paper type, set Macintosh
  • Xerox 3600DN | User Guide - Page 109
    15 true-type option 15 software install WMaincdinotwossh43, 211 reinstall Windows 10 system requirements Macintosh 32 uninstall Macintosh 32 Windows 10 status monitor, use 25 T toner save, set 15, 36 U uninstall, software Linux 28 Macintosh 32 Windows 10 W watermark create 22 delete 22 edit 22 print
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109