Xerox 6180N Disk Overwrite Installation and Usage - Page 3

4. Answer Y (yes) to the package installation questions. 5. Once the package is installed, the system provides the following Disk Overwrite installation directions: a) Enter the type of verification to perform after sanitizing the disk(s). Input S for Sample verification or F for Full verification: For example: Enter S for 10% sample verification or F for full verification. CAUTION: It is strongly recommended you accept the default settings for the partitioning when the software is initially installed and run the Disk Overwrite process once. Although the setup procedure allows you to re-size each data partition to improve Disk Overwrite performance, reducing the size of a partition may leave sensitive data on the unused portion of the disk. NOTE: The system reboots automatically after the repartition process is finished. b) Do you wish to re-size the /var/spool/XRXnps/outQ partition?(Y/N) Enter Y to resize or N to use the default values. If Y is entered, the following information appears: The current partition size is XX Gbytes. If N is entered, the system uses the default values and the setup procedure exits. c) Enter new partition size in gigabytes [Min, Max] Please wait, it may take a few minutes. Upon completion, the following message appears: Resizing of /var/spool/XRXnps/outQ has been successfully completed. d) Do you wish to re-size the /var/spool/XRXnps partition? (Y/N) Enter Y to resize or N to use the default values. If Y is entered, the following information displays: The current partition size is XX Gbytes. If N is entered, the system uses the default values, the setup procedure exits, and the system reboots. e) Enter new partition size in gigabytes [Min, Max] Please wait, it may take a few minutes. Upon completion, the following message appears: Resizing of /var/spool/XRXnps has been successfully completed. The system reboots in a few seconds. NOTE: Disk Overwrite does not work without a valid license. 701P45144 June 2006 3