Xerox 6180N IPDS User Guide - Page 12

Installation and setup • Slip sheets • Stock attributes (Name, Size, Color, Type, Weight) • Modulus • Output Location • Layout (use 1 Up only) • Rotation Setting up media In DocuSP, you must define the stock using the Printer Manager, assign each stock definition to a specific physical printer tray, and load the stock in the trays. The stock definitions are communicated to the DocuSP IPS Manager for mapping to the IPDS trays through the Tray/Bin Mappings tab. The IBM host believes that it is dealing with a printer that may have up to eight input trays. These input trays may be considered virtual trays for DocuSP IPDS. In the Tray/Bin Mappings tab you use stock names to map the stock used for each actual physical tray to the stock name used for each virtual tray used by the host. Note that stock names are used to simplify selection in the Tray/Bin Mappings dialog but that the DocuSP selects stock at print time based on the stock properties. Refer to the DocuSP on-line help for more information on using the Tray/Bin Mappings tab. 2-4 Xerox DocuSP IPDS User Guide