Xerox 6180N IPDS User Guide - Page 18

Using DocuSP IPDS Job Settings tab 3-2 The Job Settings tab provides access to the following features: • Resource Resolution: Use the resolution to indicate the dots per inch (dpi) input resolution of the data and resources sent by the host. Successful processing of the job data depends on the proper identification of the input resolution. The system cannot determine this automatically. The value is sent to the host, which uses the value to choose the resolution of raster fonts and certain images. Resource resolution is limited to those supported by the IBM PSF: 240, 300, and 600 dpi. • GOCA Image Resolution: Use the GOCA Image Resolution DocuSP IPDS feature to select the input resolution for GOCA objects within IPDS jobs. The selectable values are {240, 300, 600} dpi While GOCA data consists mostly of resolution-independent drawing orders, it can contain raster images. GOCA raster images appear in some applications, because historically they have been easier to color in a PSF environment. Unfortunately, there is no definitive information in IPDS to let the printer controller know the resolution used when these images are created so that it can do the proper scaling, as it does with IOCA images. For this reason, DocuSP IPDS needs to be told what resolution to use for GOCA raster images. Use the GOCA Image Resolution setting on the IPS Manager Job Settings tab to specify the desired resolution (240, 300, 600) for GOCA images. This option only applies to applications that use raster images within GOCA objects. For these applications, it is very important that this option be set correctly. The images print in the wrong size if it is not. • End of set criterion: The End of Set Criterion causes the DocuSP to end the set at the location indicated by the associated command. If stapling or other finishing is supported by your print engine, and has been requested at the main DocuSP screen, it will be applied on the selected set boundary. • Enable replicate and trim: When On, this feature allows some hosts to perform the replicate and trim operations before sending images to the printer. With some hosts, this improves the appearance of 240 dpi shaded areas on a 300 dpi printer. If set to Off, the DocuSP informs the host that the printer will not perform the Replicate and Trim function. • Enable enhanced font support: If set to On, the system substitutes an equivalent available resident font if the host requests a resident raster font. If the host requests a font for which there is no resident outline font match or equivalent, the default resident outline font is used. If set to Off, no font substitution is made. Requests for fonts that are resident are honored, and all other fonts are downloaded by the host. The default resident outline font is used only when requested by the host. Xerox DocuSP IPDS User Guide