Xerox 6180N DocuSP 3.6 to 3.7 Differences - Page 22

PCL Features and Additions ¨ The PCL tab in the Properties for a Queue has been enhanced as follows. ¨ Operators may now save PCL resources on a job-by-job basis, allowing for more routine saves. Previously, the save resource function only occurred when the DocuSP controller was shutdown. ¨ Operators may define the custom stock size for PCL custom jobs in the job properties. This option introduces the ability to define any size image for decomposition. ¨ A new check box allows the operator the ability to automatically center custom sized stock in a manner similar to the HP product line. When this feature is disabled, the image is oriented to the side of the paper. This feature provides HP 8100 bypass tray compatibility. ¨ The default line termination settings for PCL jobs can now be set on the DocuSP UI. Previously, the line termination settings had to be changed using a UNIX script. ¨ Line termination settings should not be used in a mixed PCL and ASCII environment, because PCL data streams can include other line termination escape sequences which could change the line termination sequence without the operator's knowledge. ¨ DocuSP 3.7x now supports HP PJL. Key features are enabled for PJL data streams and include: · PJL Set Paper = Executive, Letter, A4, Legal, A3, Ledger, Monarch, DL, C5, COM10, A5, Eurolegal, 14x17, B5, JISB4, JISB5, Hagaki, Ohagaki, ISOB4, and Custom · PJL Set Duplex = Off, On · PJL Enter Language = PCL and PCL XL · PJL Set Binding = Longedge, Shortedge ¨ The operator may set the system to ignore PJL commands. This emulates the behavior of prior releases. 18 DocuSP 3.6 to 3.7 Differences Document