Xerox 6180N DocuSP 3.6 to 3.7 Differences - Page 32
User control of LCDS resources, JDL staple support for DocuPrint 75/90, Copy Sensitive CME Support
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
LCDS 28 User control of LCDS resources ¨ In this release, LCDS resources are not displayed until the operator selects the Display button. Previously, selecting the LCDS Resource Manager tab in Administration caused all LCDS resources to display. This was time consuming, especially for customers with tens of thousands of resources. JDL staple support for DocuPrint 75/90 ¨ The LCDS STAPLE command is now available for use with the DP 75/90. The system does not require override settings to be set in the Queue properties for stapling to work. ¨ Jobs can be offset and stapled simultaneously. ¨ The STAPLE command must be invoked before the start of the job or on the first record of data in the job. Otherwise, the DP 75/90 will ignore the STAPLE switch if a JDE/JDL switch is made in the middle of the job. ¨ Jobs requiring N to 1 or Face Up and STAPLE=YES are forced to print 1 to N and Face Down due to a restriction on the stapling feature on the DP 75/90. ¨ Jobs that contain over 50 pages will not be stapled, and the default setting is to fault the job. To change the setting to print the job unfinished in the System Preferences Job Policy tab: ¨ Select Print Job Unfinished under the Overlimit Finishing section. · Select Check Set-Size Before Printing under the Overlimit Finishing section. Copy Sensitive CME Support ¨ Copy sensitive CMEs will be honored. The LCDS PDL allows individual copies of a report to contain changes from the original report by the use of copy sensitive form, RTEXT, and CMEs. Copy sensitive CMEs allow certain parts of the report to be modified on selected copies with new or replacement static text or with the specification of font or ink changes within the variable data. ¨ On the LPS printers, this was accomplished by performing multiple passes over the data. Therefore, only offline tape jobs could contain copy sensitive CMEs. ¨ On EPS printers, copy sensitive CMEs are supported with spooling queues only. The job may originate from Online, Tape, or the Socket gateway. However, if the job is extremely large, the spool may become full. The spool is DocuSP 3.6 to 3.7 Differences Document