Xerox 6180N Getting Started v3.73 - Page 25

DOCUSP 3.73 Caveat Applicable printer product If the RIP is paused while jobs are being ripped and the Job Properties window is closed, the Pages Ripped and Bytes Ripped values are cleared from the display. Restarting the RIP causes the Pages and Bytes Ripped display to resume correctly. DocuTech/DocuPrint 75/90 DocuPrint 1xx EPS A "Write Error" message is displayed if Eject/Unload is selected in Peripheral Manager for a tape device that does not contain a tape. DocuTech/DocuPrint 75/90 DocuPrint 1xx EPS Reposition output does not work for uncollated DocuTech/DocuPrint 75/90 jobs. DocuPrint 1xx EPS A large number (e.g. 100+) of jobs submitted with the printer paused causes the printer to cycle down intermittently after the printer resumes printing. Single page printing performance is very slow. Do not submit a large number of single page jobs while the printer is paused. DocuTech/DocuPrint 90 The XJDC compiler displays messages that conflict with the operation of the printer when the STAPLE=YES command is given for a job. On a DP 75/90, STAPLE=YES only allows 1 to N and Face down (NTO1=NO, FACEUP=NO) printing. DocuTech/DocuPrint 75/90 A job requiring an unsupported paper size completes with errors but does not report the reason for the errors. DocuTech/DocuPrint 75/90 Do not attempt to program a paper tray that contains ordered stock and is currently being used by a printing job. DocuTech/DocuPrint 75/90 After a restart of the DocuSP software, the Queue Manager, Printer Manager, Administration, Job Manager, and Reprint Manager windows may take up to 5 minutes to come up. As a workaround, exit power saver mode before restarting the system, or power on power off the printer during the restart. The system may display an unclearable Reset message. The system prints normally. DocuTech/DocuPrint 75/90 DocuTech/DocuPrint 75/90 When Offset stacking is enabled, stitched jobs DocuTech 61xx do not offset. XEROX DOCUMENT SERVICES PLATFORM SERIES 3-3 GETTING STARTED