Xerox 6180N Getting Started v3.73 - Page 29

DOCUSP 3.73 Caveat Applicable printer product The following are known problems with the All HTTP gateway and DocuSP Web Interface: Þ Do not specify an ampersand (&) in the sender name, file name (print ready), or Queue name fields. Þ Faulted jobs display as held in the queue list. Þ When the DocuSP Web Interface is accessed from a client workstation, the web URLs displayed in the Support section are placeholders. For the IPP gateway using XDS Plus: All Þ Send jobs to a spooling queue only. Do not send jobs to a streaming queue. After a restart or reboot, ineligible jobs in a All held queue move to an active window and change status to pending. Negative image shift values do not display the All negative sign but the job prints correctly. When a PostScript font is loaded, the font is All immediately available. However, a restart of the DocuSP software is required before the font is listed in the font window. Imposition is available for PS and PDF only. Imposition is not supported for PCL, LCDS, VIPP, or ASCII jobs. If non supported jobs are submitted and modified to be imposition jobs, the jobs print as normal and not fault. The Sides Imaged value for signature layouts must be either the Queue default value or the job must be programmed to be Head-to-Toe regardless of the orientation. If the original size of the job is changed during the printing process, such as after a proof has been run, the Original Size is set to the default Letter size. Be sure to check and, if necessary, change the Original Size before printing the job. The value shown in the Current Stock Size field does not update to match the Size value on the Stock tab. All, Imposition only All, Imposition only All, Imposition only All, Imposition only XEROX DOCUMENT SERVICES PLATFORM SERIES 3-7 GETTING STARTED