Xerox 6180N Getting Started v3.7 - Page 25
Queue Manager to be Short Edge feed, LCDS
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
DOCUSP 3.70 Caveat Applicable printer product If a custom paper size is programmed in the Queue Manager to be Short Edge feed, LCDS jobs raise a message "Edge marking values are out of range". If necessary, program the custom paper size as a Long Edge Feed. DocuTech/DocuPrint 75/90 DocuPrint 1xx EPS A large number (e.g. 100+) of jobs submitted with the printer paused causes the printer to cycle down intermittently after the printer resumes printing. Single page printing performance is very slow. Do not submit a large number of single page jobs while the printer is paused. DocuTech/DocuPrint 90 Do not attempt to program a paper tray that contains ordered stock and is currently being used by a printing job. DocuTech/DocuPrint 75/90 After a restart of the DocuSP software, the Queue Manager, Printer Manager, Administration, Job Manager, and Reprint Manager windows may take up to 5 minutes to come up. As a workaround, exit power saver mode before restarting the system, or power on power off the printer during the restart. The system may display an unclearable Reset message. The system prints normally. DocuTech/DocuPrint 75/90 DocuTech/DocuPrint 75/90 When Offset stacking is enabled, stitched jobs DocuTech 61xx do not offset. During a Print Now or Proof, a message to "Remove Sheets from the Top Tray" may be displayed when there is no need to remove sheets. Always clear the message before performing any other operation. DocuTech 61xx When a job is printing to the top tray and is interrupted by a print now or proof job, the interrupted job stops (as it should) and an error message reads, "remove sheets from top tray". Whether the sheets are removed or not, the message stays until "reset" is selected in the fault frame. DocuTech 61xx External finishing cannot be selected at the client using the IPP or HTTP gateways. Submit the job to the printer without any finishing, and select the external finisher at the DocuSP. DocuPrint 1xx EPS DocuTech 61xx XEROX DOCUMENT SERVICES PLATFORM SERIES 3-3 GETTING STARTED