Xerox 6200DX Network Guide - Page 34
Print Test Local Area Connection
UPC - 095205062090
View all Xerox 6200DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Windows 2000/XP Network 2. Verify these items in the EtherTalk area of the Configuration Pages: Enabled is set to Yes. Zone contains the desired zone name or * (* = means default local zone). 3. Verify that the client is logged into the network and printing to the correct print queue. Also verify that the user has access to the Phaser printer queue. 4. From the server desktop, use the right-mouse button and select My Network Places. Use the right-mouse button to select Properties from the cascade menu. Select Local Area Connection. 5. The Local Area Connection Properties dialog should appear. Select the Configuration tab. 6. Check the list of installed network components for AppleTalk Internet Protocol. 7. As required, install any components not listed and restart the system. 8. Once rebooted, select the Start button and Settings, then select the Printers folder. The Printers window should appear. 9. Right-mouse-click on the printer icon and select Properties. 10. Select the Advanced tab. Verify that you have selected the correct driver for your printer. 11. Select the Ports tab. 12. Verify the AppleTalk name in the Print to the following ports list. If necessary, re-select the correct name or, if not listed, Add a new port, selecting the Zone, then the name, from Steps 1 and 2 above. 13. Click on the General tab, then click Print Test Page. If printer still does not print, access PhaserSMART from the Troubleshooting tab of your printer driver or refer to the Xerox web site at www.xerox.com/officeprinting/support. Phaser® 6200 Color Laser Printer 29