Xerox 6280DN User Guide - Page 32
Overview of Network Setup and Configuration, Phaser® 6280 Printer, Software and Documentation, CD-ROM - phaser download driver
UPC - 095205747119
View all Xerox 6280DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Overview of Network Setup and Configuration Overview of Network Setup and Configuration To set up and configure over the network: 1. Connect the printer to the network using the recommended hardware and cables. 2. Turn on the printer and the computer. 3. Print the Configuration page and keep it for referencing network settings. 4. Set the printer's IP address. To do this, see Dynamic Methods of Setting the Printer's IP Address on page 36. 5. Install the driver software on the computer from the Software and Documentation CD-ROM. For information on driver installation, see the section in this chapter for the specific operating system you are using. 6. Print a Configuration page to verify the new settings. Note: If the Software and Documentation CD-ROM is not available, you can download the latest driver from www.xerox.com/drivers. Phaser® 6280 Printer 32