Xerox 850DX Xerox Wide Format AccXES HP-PJL SRS version 10.0 - Page 127

Version 10.0 AccXES PJL Interface < tab > is the tab style for the program. It will be one of the enumerated values defined under TAB above. < bins > is an integer value that is bit-mapped based upon the supported output bin locations for this finishing program. Refer to "XES Generic Finishing Communications Protocol Specification" for information on the bit-map structure. < maxlength > is an integer value that is used to pass the maximum length allowed for the specified finisher program, in millimeters. Range: 0 (means any length is allowed), and 1 - 65,535. < sheetdelivery > tells how the sheet will be delivered into the bin. It will be one of the following enumerated values: { FACEUP, FACEDOWN } < edgepreference > tells what orientation the finisher would like to get the sheet from the IOT. It will be one of the following enumerated values: {NOTSPECIFIED, SHORTEDGE, LONGEDGE} < title > is an integer value that is bit-mapped based upon the supported title block locations for this finishing program. Refer to "XES Generic Finishing Communications Protocol Specification" for information on the bit-map structure. Note that the parameters in the FINISHPROGRAMS section are tab-delimited. 6.20 XESMEDIA This category is a custom AccXES extension to report the media types that are supported by the current printer. The defined response is: @PJL INFO XESMEDIA NAME= MISMATCHMODE= GAMMACYAN= GAMMAMAGENTA= GAMMAYELLOW= GAMMABLACK= INKLIMITCYAN= INKLIMITMAGENTA= INKLIMITYELLOW= INKLIMITBLACK= FRENCHNAME= ITALIANNAME= GERMANNAME= SPANISHNAME= PORTUGUESENAME= NAME= MISMATCHMODE= GAMMACYAN= GAMMAMAGENTA= GAMMAYELLOW= GAMMABLACK= INKLIMITCYAN= INKLIMITMAGENTA= INKLIMITYELLOW= INKLIMITBLACK= Page 122 of 160