Xerox 8560N User Guide - Page 99
Transparency Images Are Too Light or Too Dark, Colors Are Wrong, Paper Tray Setup, Tray 1 Paper
UPC - 095205733273
View all Xerox 8560N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Solving Print-Quality Problems Transparency Images Are Too Light or Too Dark Possible Cause Solution Text or graphics printed on transparencies are either too light or too dark. 1. Verify that Transparency is selected in the software application or in the printer driver. 2. On the control panel, verify that the tray containing the transparencies is set to print transparencies: a. Select Paper Tray Setup, and then press the OK button. b. Select one of the following options and then press the OK button: ■ Tray 1 Paper (When printing from Tray 1, you must also select the appropriate paper size, Letter or A4, and then press the OK button.) ■ Tray 2 Paper Type, Tray 3 Paper Type, or Tray 4 Paper Type c. Select Transparency, and then press the OK button. 3. Print the Paper Tips page for more information about transparencies: a. On the control panel, select Information, and then press the OK button. b. Select Information Pages, and then press the OK button. c. Select Paper Tips Page, and then press the OK button. Note: Use only recommended Xerox transparencies. See also: Recommended Media List (United States) Recommended Media List (Europe) Colors Are Wrong Possible Cause The color produced by the system is wrong or differs from the color that it must match. Solution ■ See the Online Support Assistant for information about color matching at www.xerox.com/office/8560Psupport. ■ See the Advanced Features Guide at www.xerox.com/office/ 8560Psupport. Phaser® 8560 Color Printer 4-10