Xerox C2424 User Guide Section 6: Networking - Page 41

Novell NetWare Novell NetWare Software Step-By-Step 1. Verify that CentreWare DP and a device driver have been loaded on the workstation. 2. Click Start, click Settings, then click Printers to verify that the system is installed. Launching CentreWare DP 1. Click Start, click Programs, then click CentreWare DP. 2. Select the desired system. If a communications error message appears, your system is not able to communicate with your workstation. Verify the system settings, then return to this document. 3. With the system selected, click the Printer drop-down list, then select Advanced Setup. 4. Select one of the following connection methods: ■ Novell Directory Services ■ Bindery 5. Verify that the information displayed is also contained on the "Configuration Page". Verify these items: a. The queue name of the system is set to service. If necessary, create a new queue to test the system. b. The Primary Server lists the server name on the "Configuration Page". Printing a Document 1. Click the Tools drop-down list. 2. Select the Send File... menu item, then select the appropriate directory and file for downloading. Verify that this is a valid file with no errors. 3. Click OK. The file is sent to the system. If the document does not print, review the Novell Menu settings on the "Configuration Page". Verifying the Network Settings 1. At the CentreWare DP main screen, click the Printer drop-down list, click Properties, then click Connections. 2. Click the Network Card tab. A new dialog box displays information about frame type and connectors. 3. Verify that the system is enabled and the connector and frame type are correct. If changes are made, reset the system from the control panel. 4. Re-print a test page. If the test print does not print, go to www.xerox.com/office/support. WorkCentre® C2424 Copier-Printer 6-41