Xerox DC240 x-rite @ DTP32R and DTP32HS Operator's Manual - Page 12
Service Information, General Maintenance
View all Xerox DC240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
DTP32HS DENSITOMETER Service Information The DTP32HS Densitometer is covered by a one-year limited warranty and should be referred to an authorized service center for repairs within the warranty period. X-Rite provides repair service to their customers. Because of the complexity of the circuitry, all repairs should be referred to an authorized service center. X-Rite will repair any instrument past warranty. The customer shall pay shipping and repair cost to the authorized service center, and the instrument shall be submitted in the original carton, as a complete unaltered unit along with all the supplied accessories. General Maintenance Your instrument requires very little maintenance to achieve years of reliable operation. However, to protect your investment and maintain reading accuracy, a few simple-cleaning procedures should be performed from time to time. General Cleaning Whenever required, the exterior of the instrument may be wiped clean with a cloth dampened in water or mild cleaner. NOTE: DO NOT use any solvents to the clean the instrument, this will cause damage to the cover. Cleaning the Strip Reading Mechanism The reading mechanism should be cleaned once a week in normal environments, and more often in dirty or dusty environments. 1. Disconnect the power supply from the instrument. 2. Turn instrument upside-down. 3. Using your index finger and thumb, pinch the two tabs on the bottom of the base assembly towards each other. Base Tabs 4. Holding the tabs, lift base assembly upward. 5. Clean base surface, bottom plate surface, idler rollers, and drive wheels with a lint-free cloth. 10