Yamaha 6 MODX 6/7/8 Owners Manual - Page 36

Playing the Keyboard 4-8 Adjust other parameters if necessary. Here, set the Curve Polarity (Polarity) to "Bi," and the Curve Ratio (Ratio) to "+63." 5-1 4-8 5 Set the instrument parameters for Part 2. 5-1 Touch the [Edit Common Control Settings] button. The Control Assign display for Common/Audio Edit appears. 5-2 Touch the [+] button. Destination 7 is added. 5-3 On the [Destination 7] tab, set Source to "Asgn Knob 7," and [Destination 7] to "Part 2 Assign 7." 5-4 Touch the [Edit Part 2 Control Settings] button. Set the parameters the same as the ones for Part 1. Here, set the Curve Polarity (Polarity) to "Bi," and the Curve Ratio (Ratio) to "-64." This completes the setting.  When further adjustments are needed • Touch the [Edit Common Control Settings] button, and switch between Destination 6 and 7, and adjust the Curve Type or Ratio. or • Press KNOB POSITION [1], turn Knobs 6 and 7 to make a setting for when the Super Knob is turned all the way to the left, and simultaneously press [SHIFT] and KNOB POSITION [1] to store the settings. Next, press the KNOB POSITION [2], turn the knobs again to make a setting for when the Super Knob is turned all the way to the right, and simultaneously press [SHIFT] and KNOB POSITION [2] to store the setting. Checking the Super Knob settings This section covers the procedure to check the parameter values changed by operation of the Super Knob. 1 Press the [PERFORMANCE (HOME)] button. The button lights, indicating that you can make common settings for all Parts. 2 With the [View] button off, press the [ASSIGN] button to select Common Assign 1-4 or Common Assign 5-8. The button lights when Assign 1-4 is selected, and the button flashes when Assign 5-8 is selected. The functions currently assigned to Knobs 1-4 (5-8) and the parameter values are shown. 3 Turn the Super Knob while playing the keyboard. All relevant parameter values are simultaneously changed and all assigned functions are applied to the sound. NOTE For details about Knob assignments and Super Knob settings, see the Reference Manual PDF document. Checking parameters assigned to the Super Knob To confirm the parameters assigned to Super Knob, open the Super Knob display. 1 While the Performance Play display is shown, touch the [Motion Control] tab on the left side of the display. 2 Touch the [Super Knob] tab on the left side of the display. The Super Knob display appears. 3 On the Super Knob display, touch the [Edit Super Knob]. The Control Assign display appears. You can see detailed information for the Super Knob settings within one page. Make adjustments if necessary. NOTE The Control Assign display can be opened from the Performance Edit display, by first touching the [Control] tab on the left side of the display, and then touching the [Control Assign] tab. 32 MODX Owner's Manual