Yamaha AR-100 Owner's Manual - Page 95
Press the REC button or select the corresponding control in the display.
View all Yamaha AR-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
4. Use the SONG SELECT buttons (or the corresponding controls in the display) to select the song number for recording. STOP MUSIC DISK RECORDER 01 PLAY SONG SELECT DISK IN USE REC When a disk is first inserted, song number 1 is automatically selected. Song numbers 1 through 40 are available and up to 40 songs can be stored on a disk. However, the amount of available song numbers may be less depending on the amount of the song data you have recorded. 5. Press the REC button (or select the corresponding control in the display). MUSIC DISK RECORDER 01 DISK IN USE STOP PLAY SONG SELECT REC DATA CONTROL The REC button lamp lights and the PLAY button flashes to indicate that record is set to standby. 6. Press the PLAY button. STOP MUSIC DISK RECORDER ---- PLAY SONG SELECT DISK IN USE REC 00:00 If the selected song number already contains recorded data, two dashes ("- -") appear at the left part of the M.D.R. LED display and flash along with the song number, warning you that the selected song number already contains recorded data. If you want to execute recording operation over the song number, press the REC button again. To avoid recording over the data, select another song number for recording or press the STOP button to cancel recording. The PLAY lamp lights up and small dashes flash across the LED display from left to right, indicating that the M.D.R. is reading the Registrations and other settings. 7. Music Disk Recorder 89