Yamaha AS1000 Owner's Manual - Page 12

Controls and functions ■ Remote control 1 A/B/C/D/E 2 PRESET 3 VOL 4 INPUT MUTE INPUT VOL 4 Amplifier control buttons INPUT / Selects the input source you want to listen to. Notes • When MAIN DIRECT is selected as the input source, no signals are output at the PRE OUT and REC jacks. • If headphones are plugged into the PHONES jack while MAIN DIRECT is selected as the input source, no audio is output at the PHONES jack. VOL +/- Controls the volume level. Note The VOLUME control does not affect when you select MAIN DIRECT as the input source. Adjust the volume level using the volume control on the preamplifier connected to the MAIN IN jacks. MUTE Reduces the current volume level by approximately 20 dB. Press again to restore the audio output to the previous volume level. y You can also press VOL +/- to resume the audio output. ■ Installing batteries in the remote control 1 1 Infrared signal transmitter Outputs infrared control signals. 2 Yamaha tuner control buttons Control functions of Yamaha tuner. Refer to the owner's manual of your tuner for details. Note Not all Yamaha tuners can be controlled by this remote control. 3 Yamaha CD player control buttons Control various functions of Yamaha CD player. Refer to the owner's manual of your CD player for details. y Press once to pause and twice to stop playback. Note Not all Yamaha CD players can be controlled by this remote control. 3 2 1 Press the part and slide the battery compartment cover off. 2 Insert the two supplied batteries (AA, R6, UM-3) according to the polarity markings (+ and -) on the inside of the battery compartment. 3 Slide the cover back until it snaps into place. 12 En