Yamaha AS60-112T Owner's Manual - Page 6

How to use the AS60-112T Before making any connections, make sure that the power is switched OFF on the AS60-112T and all other devices. I Connecting a Silent Violin/Viola/Cello Use a standard monaural plug cable to connect the LINE OUT jack on the Yamaha Silent String Instrument (Silent Violin, Silent Viola, Silent Cello) to the INPUT jack on the AS60-112T to create a 60W amplifier system. * If the sound is distorted, adjust the volume on the instrument. I Connecting an AG-Stomp* (Stereo) * sold separately Since the AG-Stomp is equipped with stereo outputs, you can set up a stereo amplifier system by connecting one AS60-112T to the AG-Stomp's OUTPUT L/MONO jack, and another AS60-112T to the OUTPUT R jack. This setup delivers greater expansiveness from effects like Stereo Chorus, etc. All connections should be made using standard monaural plug cables. Silent Violin Silent Viola Silent Cello INPUT LINE OUT LINE OUT AS60-112T INPUT OUTPUT L/MONO OUTPUT R INPUT I Connecting an AG-Stomp* (Monaural) * sold separately The Yamaha AG-Stomp is a guitar pre-amplifier system with built-in effects. Use a standard monaural plug cable to connect the LINE OUT jack on the Yamaha Silent String Instrument to the INPUT jack on the AG-Stomp. Next, use another standard monaural plug cable to connect the OUTPUT L/MONO jack on the AG-Stomp to the INPUT jack on the AS60112T. In this setup you can use the AG-Stomp to add effects such as Chorus, Reverb, etc. to the string instrument, or to prevent feedback during performance. AS60-112T L Side AG-Stomp AS60-112T R Side I Connecting Multiple AS60-112Ts Connect the LINE OUT jack on one AS60-112T to the INPUT jack on another AS60-112T to create a high power 120W amplifier system. You can increase the amount of power by connecting a third or fourth unit to the system in the same manner. INPUT OUTPUT L/MONO INPUT AG-Stomp INPUT LINE OUT AS60-112T LINE OUT AS60-112T LINE OUT INPUT AS60-112T 6