Yamaha AX-9 Owner's Manual - Page 14

SPECIFICATIONS Minimum RMS Output Power per Channel 8 ohms, 20 Hz to 20 kHz, 0.03% THD 50W+50W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) 8/6/4/2 ohms 78/88/100/112W DIN Standard Output Power per Channel (4 ohms, 1 kHz, 0.7% THD) [U.K. and Europe models only 65W IEC Power (8 ohms, 1 kHz, 0.03% THD) [U.K. and Europe models only 65W Power Band Width 8 ohms, 25W, 0.06% THD 10 Hz to 40 kHz Damping Factor 8 ohms, 20 Hz-20 kHz 80 or more Maximum Output Power (8 ohms, 1 kHz, 10% THD) [General model only 70W Input Sensitivity/Impedance PHONO MM 2.5 mV/47 k-ohms CD/TUNER/TAPE/MD/AUX 150 mV/47 k-ohms Maximum Input Signal (1 kHz, 0.04% THD) PHONO MM 90 mV Output Level/Impedance REC OUT 150 mV/800 ohms Headphone Jack Rated Output/ Impedance Output Level (8 ohms, 1 kHz, 0.03% THD 0.4V Impedance 390 ohms Frequency Response (20 Hz to 20 kHz) CD/TUNER/TAPE/MD/AUX 0±0.5 dB RIAA Equalization Deviation (20 Hz to 20 kHz) PHONO MM 0±0.5 dB Total Harmonic Distortion (20 Hz to 20 kHz) PHONO MM to REC OUT 0.02% CD/TUNER/TAPE/MD/AUX to SP OUT (25W/8 ohms)..0.02% Signal-to-Noise Ratio (IHF-A Network) PHONO MM (5 mV Input Shorted 82 dB CD/TUNER/TAPE/MD/AUX (150 mV Input Shorted) ... 105 dB Residual Noise (IHF-A Network 100 µV Channel Separation (Vol. -30 dB) PHONO MM (Input 0 ohm Terminated 1 kHz 60 dB CD/TUNER/TAPE/MD/AUX (Input 5.1 k-ohms Terminated 1 kHz 60 dB Tone Control Characteristics BASS: Boost/cut 10 dB (50 Hz) Turnover Frequency 350 Hz TREBLE: Boost/cut 10 dB (20 kHz) Turnover Frequency 3.5 kHz Power Supply [U.K. and Europe models AC 230V, 50 Hz [General model AC 110/120/220/240V, 50/60 Hz Power Consumption 120W AC Outlets 3 SWITCHED OUTLETS [Europe and General models 100W max. total 1 SWITCHED OUTLET [U.K. model 100W max. total Dimensions (W x H x D 280 x 118.5 x 388.5 mm 11" x 4-11/16" x 15-5/16") Weight 6.1 kg (13 lbs. 7 oz.) Accessories Remote control transmitter Batteries Specifications subject to change without notice. 14