Yamaha BD-A1000 Owners Manual - Page 38

SETUP MENU TV System You can select TV System from PAL, NTSC and Multi. Set the same TV System as your TV set. For more details on output formats, refer to "About the video output formats" (p. 37). NTSC*, PAL, Multi (U.S.A. and Canada models) NTSC, PAL*, Multi (Australia model) Color Space You can select the Color Space (p. 42) output from HDMI. This function is available when this Player is connected with an HDMI cable. RGB Outputs video signal at normal signal range. YCbCr 4:4:4* Sets Color Space to YCbCr 4:4:4. YCbCr 4:2:2 Sets Color Space to YCbCr 4:2:2. Full RGB When RGB is set and white and black on the screen are too faint, select this item. This setting is effective when a connected component supports RGB 0-255 range. Note - This function is only available on TVs that support this function. HDMI Deep Color When your TV and/or AV receiver is compatible with Deep Color (p. 42), set this item according to your TV/AV receiver. This function is available when this Player is connected with an HDMI cable. 30 bits, 36 bits, Off* HDMI 1080p 24Hz This outputs the BD-Video encoded in 24Hz frame rate in HDMI 1080p 24Hz. Smoother video playback may be available with this function. This function is available when your TV/AV receiver support this function, and this Player is connected with an HDMI cable. For more details on output formats, refer to "About the video output formats" (p. 37). Auto*, Off Note - This setting is disabled when output resolution is other than 1080p. Lip Sync You can set/adjust the Lip Sync (p. 43) function. To adjust Lip Sync manually, select Manual, then press 2/3 to adjust the figure. Auto*, Manual, Off Video Process Video Mode You can select Video Mode below. Standard* The image is most natural and well-balanced. This mode suits for normal use. Vivid The image is more vivid and sharp. Cinema The image suits for watching movie in dark room. Custom You can adjust the visual image manually. Press 5/ a to select the parameter, then press 2/3 to adjust the figure. Brightness Adjusts the overall brightness of the image. Saturation Adjusts the richness of the color in the projected image. Hue Adjusts the tint of the projected image. Contrast Adjusts the bright areas (white levels) in the image. Sharpness Adjusts the sharpness of objects in the video. CTI Smoothes out the edges of color images. Color images are rendered more distinct. The default settings are 0. Color Adjust You can adjust Brightness/Saturation/Hue for each color (Red/Green/Blue/Yellow/Cyan/Magenta). To use this function, set Video Mode to Custom. For details on the setting items, see "Video Mode" (p. 34). The default settings are 0. Auto Contrast Adjusts contrast to optimize the played back image. Off*, On Noise Reduction You can set the Noise Reduction to a level of 0 to 3. 0 is off, and 3 is the maximum level. 0*, 1, 2, 3 De-interlacing Mode You can select how to detect the video signal. Set to Auto for normal use. When horizontal stripping noise appears on the screen, set this to Film/Video to remove the noise. Auto*, Film, Video 34 En