Yamaha BD-S681 Owners Manual - Page 38

SETUP menu ■ General Setting The default settings are marked with " * ". System Auto Power Standby Sets the power-saving function to on/off. When set to on, this Player will turn to standby mode after 20 minutes from the last operation without any playback. Hint - Before this Player turns to standby mode, the screen saver (p. 38) will activate. On*, Off HDMI Control You can set the Player to receive control signal from a TV/AV receiver compatible with the HDMI Control function via an HDMI cable (p. 12). On, Off* Using HDMI Control function Using the HDMI Control function, you can interactively operate this Player with your TV (HDMI Control function supported). When you connect this Player to the TV compatible with the HDMI Control function using an HDMI cable and set HDMI Control in the SETUP menu to on (p. 34), you can perform the function listed below. •Automatic input select function When you start playback of this Player, the input selector of the TV (and an AV receiver if this Player is connected to the TV via the AV receiver) is switched to this Player automatically. TV Power is turned on automatically depending on the TV. •Automatic power off function When you turn off the TV while this Player is in stop mode and the SETUP menu screen is not displayed, the power of this Player is also turned off automatically. Notes - HDMI Control function may not work properly depending on the TV. - Functions other than ones shown above may work depending on the TV or AV receiver. - In order to make the HDMI Control function available, set up settings for the HDMI Control function on ALL components (this Player, TV, and AV receiver). Certain operation may also be required. - Each function may be set independently to activate/deactivate depending on the TV. - Refer to the operation manuals supplied with the TV and/or AV receiver for details regarding setup. - When set to on, power consumption during standby mode increases due to HDMI Control function. Load Default You can reset all settings of this Player to default setting except Security setting (p. 35). For details on default settings, see pages 31-39. Upgrade You can upgrade the software manually from USB Storage or Network. For details on software upgrade, refer to "Software upgrade" (p. 42). Upgrade Notification You can select whether to display the message on the screen when this Player detects newer software over the Internet. On*, Off 3D Playback Message You can turn on or off a warning message concerning 3D video playback that appears on the TV when this Player is turned on. On*, Off Local Storage You can check the free space of USB memory device connected to this Player, or format (empty) the "BUDA" folder in the USB memory device connected to this Player by selecting Format. Hint - To enjoy the BD-Live feature (p. 30), you need to connect a USB memory device (with at least 2GB of free space) to one of the USB connectors (front/rear) of this Player to use the USB memory device as Local Storage. Easy Setup You can perform Easy Setup (p. 19). Software License You can view the information about third party software license. By using this product, you will be deemed to have accepted the terms and conditions. 34 En