Yamaha BD-S681 Owners Manual - Page 41
Display Setting, Original, image size, On 16:9 wide screen TV, 9 Full, 9 Normal, On 4:3 TV, 3 Pan
View all Yamaha BD-S681 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
■ Display Setting The default settings are marked with " * ". TV 3D Output You can select 3D or 2D video output from this Player. Auto* This Player automatically selects 3D or 2D videos. Off This Player always selects 2D videos. Note - Even if you set "3D Output" to "Auto" and play back a Blu-ray 3D Disc, this Player selects 2D images depending on the setting of TV, etc. TV Screen You can set the screen aspect ratio of the connected TV, and adjust the video output. If you switch your TV (i.e. because you have bought a new one) and the screen aspect ratio of the connected TV changes, you will have to change the TV Screen setting. 16:9 Full Select this when this Player is connected to a TV with a 16:9 screen. When a 4:3 aspect ratio video is played back, the video is displayed as shown below. 16:9 Normal* Select this when this Player is connected to a TV with a 16:9 screen. When a 4:3 aspect ratio video is played back, the video is displayed as shown below. 4:3 Pan Scan Select this when this Player is connected to a TV with a 4:3 screen. When a 16:9 aspect ratio video is played back, the video is displayed as shown below. 4:3 Letter Box Select this when this Player is connected to a TV with a 4:3 screen. When a 16:9 aspect ratio video is played back, the video is displayed as shown below. Original image size On 16:9 (wide screen) TV 16:9 Full 16:9 Normal 4:3 Original image size On 4:3 TV 4:3 Pan Scan 4:3 Letter Box 16:9 4K Upscaling Enables/disables 4K upscaling for HDMI video output. When set to on, you can set "HDMI Resolution" to "4K". On*, Off. SETUP menu HDMI Resolution You can select the HDMI video output resolution. For more details on output formats, refer to "Video output formats" (p. 40). When set to Auto, resolution is set to the maximum resolution according to the connected TV. When set to Disc Native, the original resolution and video frequency, recorded in the Blu-ray Disc or DVD that is played back, are used. You can use a video up-converter function of an external device. When other than a Blu-ray Disc or DVD is played back, the resolution and video frequency will work as Auto. If a Blu-ray Disc or DVD whose resolution and video 4 frequency are not compatible with the connected TV, no image will be output. In this case, stop playback, and select an option other than Disc Native. Settings Auto*, Disc Native, 4K, 480i/576i, 480p/576p, 720p, 1080i, 1080p Notes - To output HD audio (Dolby TrueHD or DTS-HD Master Audio) from HDMI terminal, set HDMI Resolution to Auto or more than 720p. - 4K is available only when 4K Upscaling is set to On. - Auto is automatically selected when 4K Upscaling is set to Off while HDMI Resolution is set to 4K. TV System You can select TV System from PAL, NTSC and Multi. Set the same TV System as your TV set. For more details on output formats, refer to "Video output formats" (p. 40). NTSC, PAL, Multi (The default setting differs depending on your model.) Color Space You can select the Color Space (p. 47) output from HDMI. This function is available when this Player is connected with an HDMI cable. YCbCr 4:4:4* Sets Color Space to YCbCr 4:4:4. YCbCr 4:2:2 Full RGB Sets Color Space to YCbCr 4:2:2. When RGB is set and white and black on the screen are too faint, select this item. This setting is effective when a connected component supports RGB 0-255 range. RGB Outputs video signal at normal signal range. Note - This function is only available on TVs that support this function. HDMI Deep Color When your TV and/or AV receiver is compatible with Deep Color (p. 47), set this item according to your TV/AV receiver. This function is available when this Player is connected with an HDMI cable. 30 bits, 36 bits, Off* 37 En